wizard

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 167 total)
  • Author
    Posts
  • in reply to: Bosch WTA 3100 #392238
    wizard
    Participant

    Re: Bosch WTA 3100

    When button is more floppy, switch is selected, so low heat.

    in reply to: Bosch WTA 3100 #392236
    wizard
    Participant

    Re: Bosch WTA 3100

    Pinkshoes, button is ‘low heat’ so selecting it (pushing in) selects low heat. Wiz

    in reply to: Bosch D/W tap symbol #392131
    wizard
    Participant

    Re: Bosch D/W tap symbol

    Jim, that’s one of the new ones that has a flow sensor (impellor jug) on the side tank, position 0405 on the parts diagram. Have changed a couple of these, although may be just a poor connection. Could also be water in the base – usual suspect for leaks is the connection between the side tank and tub (round plastic vent towards rear). I usually take tank off, clean o’ring and refit with a smear of silicon sealant. Wiz

    in reply to: hotpoint EW84 #384164
    wizard
    Participant

    Re: hotpoint EW84

    Anybody know what this fault code e12 relates to ? I’ve got a customer getting this intermittently on this model. Thanks Wiz

    in reply to: Bosch WTV74103GB/07 Tumble Dryer #349142
    wizard
    Participant

    Re: Bosch WTV74103GB/07 Tumble Dryer

    I have since had one blocked in the ducting between the condenser and rear fan where it passes the rear of the motor. Blocked condenser (cool air left to right) can also give this fault. Wiz

    in reply to: Bosch HBC84K551B/02 #373346
    wizard
    Participant

    Re: Bosch HBC84K551B/02

    John, don’t know, but looking at martin’s schematic it looks like the main body of the hinge is in the cabinet. Does it lift off the upright arms of the hinge when slightly opened like the old AEG ovens ? Wiz

    in reply to: Hoover part no. 49006650 #370067
    wizard
    Participant

    Re: Hoover part no. 49006650

    Out of stock, as suspected. Thanks anyway. Anybody got one ? Wiz

    in reply to: Hoover part no. 49006650 #370066
    wizard
    Participant

    Re: Hoover part no. 49006650

    Already found that, checking with them this morning. Wanted to see if anybody had one rattling about in the van.

    in reply to: Bosch SMS50E02GB/02 #367928
    wizard
    Participant

    Re: Bosch SMS50E02GB/02

    Mark, might be worth cleaning all the connections on the board. Had a couple of these suffering from poor connections in various locations, however not for e02 fault. Your call. Wiz

    in reply to: BOSCH OVEN HBN43N551B clock flashes fast #359255
    wizard
    Participant

    Re: BOSCH OVEN HBN43N551B clock flashes fast

    Clock replaced, problem sorted. Wiz

    in reply to: Bosch HBN3550GB/02 #362986
    wizard
    Participant

    Re: Bosch HBN3550GB/02

    Update. Changed element, no change.Checked everything again and only got 145v at the heater. Turned out to be a duff selector switch. Wiz

    in reply to: bosch wte 6920 gb/04 #364011
    wizard
    Participant

    Re: bosch wte 6920 gb/04

    Assuming the condenser is clear,check for blockage between the condenser and the fan, had one the other day blocked there. Wiz

    in reply to: BOSCH OVEN HBN43N551B clock flashes fast #359253
    wizard
    Participant

    Re: BOSCH OVEN HBN43N551B clock flashes fast

    anybody else had this fault ? Wiz

    in reply to: BOSCH OVEN HBN43N551B clock flashes fast #359252
    wizard
    Participant

    Re: BOSCH OVEN HBN43N551B clock flashes fast

    Did this get resolved ? I’ve got an HBN430550B/02 doing exactly the same. Have checked input voltage ang meggered all components with no errors. Don’t want to order a timer unless I’m 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it’s that. Thanks. Wiz

    in reply to: Bosch HBN3550GB/02 #362985
    wizard
    Participant

    Re: Bosch HBN3550GB/02

    Thanks guys, certainly looks like it’s only at half power.Very weird. Will change the element. Wiz

Viewing 15 posts - 46 through 60 (of 167 total)