Forum Replies Created
-
Posts
-
Re: Indesit D/W DIF04
johnnyj wrote:Have you checked the wiring going down through the door to the base my guess would be door switch wiring broken
+1
Re: Stoves oven SN90FP PCB Fan Control
i dont think the clock on these affects the top oven, id have a look in that area 1st.
Re: Beko – carbon brush uneven wear?
Does sound like a motor fault, check the wiring around the motor 1st 🙂
Re: hotpoint recall 70,000 dishwasher
why just those models?, the 100bit cards where in loads of different models with same setup and wiring?
Re: Smeg A1-2 range cooker
rocker wrote:The clock as gone dead,, would this also effect the grill. please john
i might be wrong but i think one of the thermal cutouts at the back can go causing this fault!
Re: dryer fire on bbc news this morning
the mod kit includes a new cap, metal bracket to relocate the cap around 10cm to the right of original location, a new cable tie and instructions on what wires to “tape up”
Knowhow in Scotland are doing stacks of them, so much so the gas cooker Installers are going out with loads every day 😉
Re: Faulty cookers
I was at a flavel the other day, 4 sided seal no safety cut off switch for thermocouple.
I phoned beko and was told this model isn’t covered by the recall, I asked the beko tech guy what the difference was???? His response ” I don’t know no one has comlained about this model”
Re: Another joke.
A Scotsman & his ever nagging wife were on holiday in Jerusalem when the wife died suddenly. The undertaker said it will cost €5,000 to ship her home or €50 to bury her here. The Scotsman said ship her hame. The undertaker said, “But, sir, why don’t you bury her in the Holy Land & save the money?” The Scotsman said “Listen here pal, a long, long time ago a man called Jesus was buried here & 3 days later he rose from the deed. She’s gawn fucking hame
Re: Hotpoint TVM35a
thanks for quick reply im sure these timers are interchangable connect says you need a service document.
i used to have a copy lying around not sure if its the same one but cant find it anyway.
thanks for help tho.
Re: ZCG662GXC
here is a short vid of flame with door open
Re: ZCG662GXC
yeah still orange with door open tbh i think its worse with door open, the burner screws into a bracket so dont think i could have it on wrong.
i will have a look for insualtion, i agree it seems an air issue just not sure where to start.
thanks for the advice.
