[A1TEC]

Re: rangemaster 110 – difficult to ignite

Check the insultion cover on the ignition lead, some times the spark shorts if the lead cover slips down, you might only get a couple of sparks at the electrode and the rest go to earth.

Cheers

John.

[A1TEC]

Re: Whirlpool dishwasher problem

Thanks Chris, wondered about pump but was not sure, thanks again.

John.

[A1TEC]

Re: CREDA Double Oven 48149V

Dose it reach the 240 degrees on the first heat up and dose it maintain that temp constant.?

Most stats have a differential setting so most heat over on first run before settling down to chosen temp.

This stops the stat cutting on/off constantly.

[A1TEC]

Re: I just had to say…

nationalhomecare wrote:
Its Friday night and i’m already dreding monday morning.
Steve

I know what you mean I used to get that feeling every week when I worked for National Homecare. 😆

[A1TEC]

dpm wrote:This needs to be hosted somewhere, as previously discussed…

Yes i would like to down load it if possible 😉

[A1TEC]

Re: Slow Carriers

They turned up this afternoon,not even a blush 😳

[A1TEC]

Re: One for Alex – How to take the back of a Zanussi

Why did zanussi not think of that idea? 😆

[A1TEC]

Re: DOMESTIC APPLIANCES LIFESPAN AND GLOBAL WARMING

ISE machine has thought along the lines of longer life, but at a cost compaired with other brands, suppose you get what you pay for.

[A1TEC]

Re: DOMESTIC APPLIANCES LIFESPAN AND GLOBAL WARMING

I was at a 22 year old service machine the other day, the reason the dont last as long anymore is cheap components 🙁
Machines could be made to last longer but at a cost, while the price of every thing has risen in the last 10 years the price of washers has fallen, also the price of spares has rocketed for some reason 😮

[A1TEC]

Re: Indesit WIL 163

Thanks again Chris, will order one on Tuesday. 😀

[A1TEC]

Re: Indesit WIL 163

Thanks Chris,could not find it on masterpart and £89.00 from connect was a no no. 😯

[A1TEC]

Re: HPT.WD51

Cheers Tim. 😀

[A1TEC]

Re: Bosch wont empty?

Could be a air lock,had that before. 😉

[A1TEC]

Re: Electrolux oven

Thanks for that Chris,thought about cavity cut out but that would cut off power to element,so must be motor fault.

Cheers John. 🙂

[A1TEC]

Re: commercial appliances

Tony,to get into comercial repairs you need a bank account like Richard Branson. 😆

The commercial market expect to be invoiced for anywork done and they pay you when they are ready to.(30-60 days usually).

As I say you need really good cash flow and even then you get stretched.

I would not put anyone off the idea of repairing commercial equipment but just pointing out some of the down sides.

[Author]

Posts