[admin]

Re: GENERIAL DOMESTC APPLIANCES DISHWASHER. MODEL BF41

Hi

Looks like brant parts

http://www.4hotpoint.co.uk/cgi-bin/product.pl?PID=592043&query=Hotpoint{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20BF41&model=BF41&path=52511

Bryan

[admin]

Re: north london work

if you fancy coming into the GU, SL or RG postcode area we have work going

[admin]

Re: Amana SRD522VE american fridge freezer

Hi

Whirlpool or true amana model ? how old and serial / service number ?

Bryan

[admin]

Re: Samsung oven BF641FST

Display PCB or overload’s are VERY common.. BUT beware there are 2 different PCB’s for the same model.

Bryan

[admin]

Re: rangemaster 110

Standard 5 or 6 button eaton timer isn’t it ?

Bryan

[admin]

Hotpoint FFM70 f/freezer ice build up top of evaporator

Locate the defrost sensor from the bottom to the top of the evaporator as long as there is no air ingress. This will cause a slightly longer defrost time.
Have you checked for the heater working ect ?

Bryan

[admin]

Re: Conference Tickets

Hi Ken.

That’s great BUT we still need to find the solution for printing the badges.. or do we

bryan

[admin]

Baumatic B501ss

Have you checked for a burnt contact on the multi switch ?

Bryan

[admin]

Samsung RS21 no or occasional fridge fan.

Hi

The correct defrost sensor ends with 13h or maybe even k now. I have you changed the evap cover?.

I’ve also found bad connections on the multiplug at the pcb due to corrosion.

Bryan

[admin]

gorenje WA50140

Garn.
Isdals number is 08450508539

Bryan

[admin]

Re: Some worrying remarks made about Amica

been selling them for 2 yrs and only had a few go wrong ,all got fixed and still working ,so its been fine for me so far on the amica front 😀

canufixit

[admin]

What is GIAS?

Hi

GIAS is Hoover,candy,rossier ect group of companies.

Bryan

[admin]

Re: Indesit IDL 502: Not filling

Many thanks for your answer. Can you help me to eliminate any of the possible problem areas? Can I test the fill valve or do something to confirm it works? If you were me, would you replace the pressure switch anyway!?

It doesn’t seem to be the circulation pump (but what do I know?). And if it’s the PCB, I think I’ll throw my hat at it. As far as I can see, a new PCB is well over 100 pounds. And a new similar machine only about 250 pounds.

Any ideas?

Thanks again.
Bob

[admin]

Re: Indesit IDL 502: Not filling

Hello,
I believe the model number may be French. But it’s a standard bottom of the range Indesit dishwasher. It’s been just fine until now. If anyone can help to diagnose this problem, I’d be very grateful. (Someone suggested turning it upside down, which apparently is the cure for a faulty water intake).

Looking forward to help!
Many thanks.
Bob

[admin]

Re: Work Up For Grabs

I will ken

Bryan

[Author]

Posts