Forum Replies Created
-
Posts
-
Re: Rangemaster SXS side by side Info
Hi
Depends on which model,it could be a beko or a LG or haer i beleive the newer ones are GE.
Bryan
Re: Sheffield 110
Hi
its a rangemaster isnt it ??
should be a zanussi one that would also fit.
Bryan
Re: Join DASA for just £65
How many people turned up for the meeting ?
Ive been told it was only about 29 in total,R/C was asked but in response side stepped and didnt give any real answers and wasnt pushed by DASA to justify their actions..
Bryan
Re: zanussi wzd 12270w not starting
dryer element going to earth…….disconnect wires….and try.. 💡
canufixit
Re: LG WD12126RD Washer Motor locking up
Cras wrote:just a quick word of warning i had one last month with same error code that turned out to be the board . I noticed that the large black capacitor on the old board was slightly domed on top 😉
yep good point… cras ………. had that one as well……so take a look at that also….!
canufixit
Re: electrolux ewf 14108w washing machine
Put your meger on the element ….
If she reads to earth… Then it’s the elementI’ve been to a block of 14 flats in my town and fixed 7 of these machines already ……7 more to go soon ?
Canufixit
Re: LG WD12126RD Washer Motor locking up
I did one last month and it was only the sensor….?
And yes …. The field dose come with the sensor……Canufixit
we use the early version written by the same guy who designed this, its based on pretty much the same platform and i will be looking to change over to this new version soon as its seems really good.
Re: LG WD12126RD Washer Motor locking up
just looked…..
in stock…..with connect distribution…..@£16.94…….to me
canufixitRe: GE pcg21m/mffbb
I might have,I will check tomorrow.
I seem to keep more of the basic common spares than ISDAL do…lol
Bryan
Re: help with my dishwasher
hello again i just tryed to put the dishwasher on after turning off the button thats flashing green that looks like this and the dishwasher makes a noise as if its starting up then the beepin noise starts i open it up and the button i turned off is back flashing green and beeping and its still dry inside.
New post deleted. and moved
i actually got to spoke to Mark Daniels at D&G today, and he has clarified a few things,
it seems that releasing agents is a cost cutting initiative and nothing to do with quality of work.
it also seems that they are picking on the agents who dont do gas as it costs too much in admin for them to run more than one engineer in one area.
