admin

Forum Replies Created

Viewing 15 posts - 8,971 through 8,985 (of 12,518 total)
  • Author
    Posts
  • in reply to: diplomat oven #127955
    admin
    Keymaster

    Re: diplomat oven

    We had a similar problem for our Diplomat Double-Oven supplied by MFI when we purchased our new kitchen. there was no user manual with the oven and all MFI could supply was a one-sided printed piece of A4 paper with some user instructions but to be quite honest were not much help and we still got confused. it did not show how the select timer operated nor did it tell us how to actually set the cook time to either start or finish so not a lot of help. we contacted them again and they said that’s all they could obtain as there was no further information on our model. so we have never used the timer (still don’t know how to set it) and always switch the oven on manually (managed to work that out ourselves). not much help when you want an early evening meal when you get home from work. oh well, that’s progress I suppose. MFI customer services staff were very nice and polite though at least!

    in reply to: Whirlpool ADG 7540, flashing lights #131887
    admin
    Keymaster

    Re: Whirlpool ADG 7540, flashing lights

    Hard to say really. It sounds as though water it is starting to fill. If I reset the program a few times it will eventually run and seems to wash fine.

    in reply to: Diplomat ADP 8112 error lights/codes #131989
    admin
    Keymaster

    Re: Diplomat ADP 8112 error lights/codes

    gah, that’s about the most stupid thing i’ve ever heard 🙁 …
    ok, does anyone know the company web site for this manufacturer? as i’ve tried to find it, but as you might guess, with no luck…
    oh well… guess i’m gonna have to get on my hands an knees and try the reset switch .oO(mental note: must remember to pull the power :zap: )

    thanks guys

    in reply to: LG WASHING MACHINE #132028
    admin
    Keymaster

    Re: LG WASHING MACHINE

    hi

    this fault will normally appear when the machine has not been able to even the washing out or has been over / under loaded.

    try to remove some or take it out and reload your machine.

    bryan

    in reply to: Bosch Dishwasher not draining #131909
    admin
    Keymaster

    Re: Bosch Dishwasher not draining

    Sorry, model no. SGS3042GB.

    in reply to: ASKO ASEA Dishwasher 1402 – water inlet valve #131759
    admin
    Keymaster

    Re: ASKO ASEA Dishwasher 1402 – water inlet valve

    Thanks again for info- nature of problem changed when I found no longer had power to inlet valve. The problem was a broken wire – just the conductor within the insulation so for a time making intermittent contact. Spliced in a new bit of wire – machine working so both management and financial resource centre both happy.
    Cheers
    David S.

    in reply to: LG WM1290FHB #129285
    admin
    Keymaster

    Re: LG WM1290FHB

    well this morning I did 2 small loads and it worked perfectly – no mad noises or anything.
    Mmmm will try another laod and this time spin it really fast! 😆

    in reply to: Diplomat ADP 8112 error lights/codes #131985
    admin
    Keymaster

    Re: Diplomat ADP 8112 error lights/codes

    Well, it seems to have worked the last few times we’ve used it, but just now i’ve opened it and the water is just a little cooler than luke-warm, i’ll check it again in 1/2 an hour, but it doesn’t (up till now) appear to have been a heating issue… i have been reading the other posts on this model and feel confident i know where the switch is… but i just wanted to make sure it was necessary, as it’s sounds like a bit of a mission getting to it… thanks for the advice NWAR

    PS, I would still really appreciate it if someone could post the error codes/light sequences and their meanings for the ADP 8112 for future reference, thanks…

    in reply to: Indesit W161 #127749
    admin
    Keymaster

    hi …
    i am also looking for the manual of the Indesit W161 UK , unfortunatly without success ….
    hope some one help
    I have tried the code No. which is 21027880 but its not thier

    in reply to: rosieres 2040db cooker #131958
    admin
    Keymaster

    Re: rosieres 2040db cooker

    Hi

    if its the fan oven element then the zanussi 3 turn fits perfectly and gives a good profit margin

    bryan :wave:

    in reply to: New world twinline 4000 oven stopped working #131892
    admin
    Keymaster

    Re: New world twinline 4000 oven stopped working

    Hi Dave

    Thanks for your prompt reply, I’ll get a local Corgi person in to lookat itright away. Thanks again

    Janey

    in reply to: Prima LPR600 – Get the door off! #131903
    admin
    Keymaster

    Re: Prima LPR600 – Get the door off!

    Genius. Job done. Thank you v. much My knob is now firm 🙂


    (I didn’t dare try those screws. They were ‘obviously’ just holding the inner door together!)

    in reply to: What’s the most illogical fault you’ve had to find? #131522
    admin
    Keymaster

    Re: What’s the most illogical fault you’ve had to find?

    i once seen a door seal with a split in it that had been sewn with wool
    that one ill never forget i can still picture that door seal now
    amazing what some people will do

    in reply to: LG WM1290FHB #129283
    admin
    Keymaster

    Re: LG WM1290FHB

    ok did it. It was a quite small space – and there was nothing there – zilch. but youre right the noise its making really sounds like something is in there.
    I’ve got the repair folk coming on tuesday – but it was great to get the washing out!! its almost fixed!!!
    thanks for your help – hugely appreciated

    😆

    in reply to: Bernstein 02-800950MR undercounter fridge not working #131893
    admin
    Keymaster

    Re: Bernstein 02-800950MR undercounter fridge not working

    The ice build up will be system fault if your sure the door shuts ok and seals ok. The hinge is fixable but you need the system looked at 1st, it might not be repairable, you will need an engineer to advise correctly.


    Kevin

Viewing 15 posts - 8,971 through 8,985 (of 12,518 total)