[admin]

Re: Bosch sps5462GB/18

No No No No No

Let me believe that I have fixed it, I’m very happy and have still not entirely worked through the backlog of xmas dishes.

Anyway, it was very proffesional kicking and cursing!

[admin]

Re: Bosch sps5462GB/18

Hi there,

I fixed it, I fixed it – Yay me!

I kicked it, cursed it, threatened it then I tipped it almost right over and loads of water came out and now it works !!!

I impressed myself with my technical knowledge!

Thanks for the help, I was trying to do the earlier mentioned 45 degree tip, but it turns out that dishwashers are quite heavy and it went a bit further than that!

Any way cheers for the help, I may even consider a new career in plumbing as a result!

Regards

Karen

[admin]

Re: Diplomat ADP 8132 Dishwasher

Help, Our dishwasher has decided to only do the rinse cycle when we are asking it to do the full wash cycle! any ideas

[admin]

Re: Disgruntled, Leeds

Dear Mrs P,

Slap him around the beak with a stale Herring, until he squawks for forgiveness, orrible little bird that he is.

PS, its a shame the Monty Python “dead parrot” sketch wasn’t a penquin……..by eck, we could have really gone to town on him!

Kevin

[admin]

Re: DASA.

hi chris,

Don’t you know its xmas?

Best of luck with this one, as I’m no longer in DASA, for a change I’ll enjoy reading the replies.

Happy NEW YEAR

Kevin

[admin]

Re: diplomat 8322 dishwasher

Hi DP Did as you said and found blockage in hose, that i unblocked. washer then worked on one rinse cycleand then went back to 4 flashes, and no water going into washer, daft question but does washer have to be fullof dishes for it to work

baz

[admin]

Re: Bosch WFP Error code F02

…and the searial # is FD801101002

[admin]

Re: Bosch WFP Error code F02

Sorry gents! It is a wfp3300gb/01.

[admin]

Re: Hoover AM1100 washing machine

hi,

I think “The how to replace the bearings on your appliance” is the wrong question to ask. Although we are here to help, we can not go into such large work explanations, due to legal requirements.

I think you should seek assistance of perhaps one of our members, try using the Directories section and type in your postcode, you will be provided with the contact numbers of an UKW member, if we have one in your area.

Kevin

[admin]

Re: Diplomat ADP8224 (SMEG) Dishwasher – E2 Error Solution

Morning,

E2 is a common enough error on this appliance. The instruction booklet often refers E2 to an external Aquastop device on the hose of the appliance. Although the aquastop is not on your appliance E2 certainly is in the form of an anti flood protection float switch. Any build up of sludge in the RH tank can cause this to activate.

Seems you got a good job done at a good price.

kevin

[admin]

Re: Creda C561E cooker

Hi Reg,

You could look in the directories (navigation bar on the left) put in your postcode and see if we have a member close to you, or put your post code here so the right person can answer you “cry for help”

Kevin

[admin]

Re: homark fan oven element

Dave_Conway wrote:

mrcrow wrote:
homark model no 02 700301

That’s enough to identify thanks 😉

mrcrow wrote:do i need to buy a special 6 pointed star screwdriver to get the screws out or is there a ‘tip’ on modifying an ordinary or phillips screwdriver to do this job

It’s called a torx 😀

mrcrow wrote:finally since you mentioned oven out…are the 4 screws which go through the side cheeks into the carcase all that holds it in

Im surethe tool you will need is a torx/T20 size, should have no problem gettin one from the likes of Halfords 🙂

Normally yes.

Dave

[admin]

Washing up

Hi there

I’ll start the washing up then!

Is there a re-set on this model & if so, what do I do?

I lost the manual years ago.

Post code = SP10 1HR

Thanks

Karen

[admin]

Re: Bosch fridge freezer

Clive / Roger,

Was surfing for solutions with my Bosch frodge freezer for which I accidentally, whilst moving , yanked out the lead that connects the fridge to the power. The lead has a brown, blue and yellow / Green earth.

I opened the back of the fidge to connect the lead back and noticed , that the fridge has a brown, black and Earth (green / yellow wire).

I connected the brown in the lead to the brown of the fridge, the blue of the lead to the black of the fridge and the earth to the earth. When I switch the fridge on the fuse in the plug blows. If I only connect the earth and brown of the lead to the fridge thereby leaving the black uncoonected then the fridge works.

Can you tell me is this correct? I dont think so but the fridge works? Please advise on the purpose of the black wire

[admin]

Hi there,
I’m cursed, my SPS5462GB will not work and I have a mountain of x-mas pots and pans to get through. It’s not filling up with water. I’ve checked the pipes and they’re clear.

Help!!

[Author]

Posts