[admin]

Re: Homark fan assisted oven white dials

Thanks Dave, I’ll try that.

Robert

[admin]

Re: Indesit WD 12S not drying

Cheers for the advice guys.

I’ll have a look round it at the weekend and maybe get the engineer back out.

With your advice we might be able to figure something out.

Thanks again

Chimp

[admin]

Re: Homark Oven Door Handle

The colour is white. Prices?

Thanks for fast response,
Adam

[admin]

Re: Bosch WFF2001 washing machine

Many thanks for the reply. We’ll give it a try and report back! BTW, would we have to contact Bosch direct for a replacement drawer?

[admin]

Re: Ceramic Hob

CDA model number..CD66 60cm ceramic hob with right hand side knobs….. 6kw etc etc available in brown too
@ £164.14 + Vat (Trade price to us)

Cda telephone…0115 970 0111.

If you have problems…phone my missus(bridie) and we can buy on our account for you. 01709 526373.

PS just squawk at her she’ll recognise you.

pps 505 deep by 575 wide by 52…..thick? outside dimentions of course

kevin

[admin]

Re: Why Subscribe To UK Whitegoods?

I suppose we could tell everyone about the exciting things we are doing behind the scences…but its boring.

We could offer them work at whatever their private charge is…..nah too much hassel.

We could offer them rumours 1ST………too upsetting, upsets the cats!!(or is that the bitches?)

We could offer them a good night out and a headache the following day…..done it, got the t shirt.

So, the answer…..lets offer nothing…just sign up, give us your dosh and we’ll do the rest….burp

Kevin

[admin]

Re: matrix

Hi Tony,

A lot of these unknowns are Homark/Servis types….post up the info from the label and we’ll all try to help.

Bet its built in, label on the back, hoses too short, tiles too high, grouted in and stood on bricks……(anyone think of anything else?) 😆

kevin

[admin]

Re: random photos

as kwatt says I’m the “old bald one” 8)

Kevin

[admin]

Re: error code electrolux-HELP

hi,

E60 is not listed but E61 to E66 are to do with the heating of the appliance and perhaps you might like to start there. The heater and thermostat are the 1st places to look. Maybe

Kevin

[admin]

Re: “E90” on a zanussi washer

configuration code error……is E90

The wiring, Pcb and display boards have to be checked, possibilities are reconfiguring the pcb , pcb swop etc. We have had a few where the pump has taken out the board….check pump carefully before powering up a new board.

If you are unable to find fault, try checking individual components for failure B4 ordering new Pcb.

Kevin

[admin]

Re: mould in my WF02865Bosch

You’re right!- I use liquid in the drum – I did try powder for a while but it didnt seem to make much difference. Thanks 😀

[admin]

Re: mould in my WF02865Bosch

Thanks- I have tried the hot wash but I will try the bicarb – any idea how to clean the water inlets- the mould seems to be in there as well. 🙂

[admin]

no the drum moves freely but there is excess movment for the inner drumand the outside drum does not move when i move the inner drum i get the feelin it might be the bearings is this gonna cost me big time

[admin]

Hi K,

I get the same problem when I try to access it from work with a completely different setup – OS, browser, ISP, keyboard, mouse, etc!

So I don’t think it’s anything I installed on either PC. And it certainly used to work. Just wandering if anyone else had this problem?

Cheers,

Tim

[admin]

Help i have one of these washers its about 5 years old lastnight when it went onto a full spin the drum started to wobble more than it should then it struck something inside stopped then started again it was at that point i stopped the machine i dont know what could cause this so please help

[Author]

Posts