Forum Replies Created
-
Posts
-
Re: Miele t4262c pcb repair
Hi Steve
Has this model got the carbon sensor brushes on the op of the drum ? (cant be bothered to look for the manual) 😆
Have these been changed as these will cause the same problem.
Bryan
Re: samsung rsh1dtmh1/xeu problem
,forgot to say aswell i put back together without plugging the thermal trip back in ~(if thats what its called,it has been on for a good while now and the fridge part is cold,freezer part is normal,my understanding is it may start to freeze up again
Hi
In that case the repair kit should cure your problem as it contains all the latest modified parts. E-mail me for details
Bryan
Re: Miele t4262c pcb repair
Hi
What is the fault that you have ? we might be able to have it repaired dependent on the fault.
Bryan
Re: samsung rsh1dtmh1/xeu problem
Hi
Without confirming that all the parts have been tested correctly then it cannot be certain..BUT if it is tripping the electric’s then STOP as it can cause a more serious problem like demolishing your kitchen.
We have a repair kit that will cure the majority of the faults on the RSH1 defrost side and evaperator cover side. Without having all the components tested we cannot confirm that the fault is in these components.
Re: Rosieres Paul Bocuse burner sizes
Hi
If those are the correct part numbers quoted then the costs aren’t really expensive for them.
If you want them then we can supply them.
Bryan
Re: GE PCG23MIMHFBB not getting very cold
Is that one with a linear compressor in it Bryan?
No Ken
It’s got the standard compressor,Yours has the linear compressor.
Common prob’s with the pcg23 are main board & evap motor. Quite often more than not both need to be changed.
Dependent on which part of berkshire you are,We maybe able to cover it.
Re: Maytag MAV9750AGW Top Loader NoSpin
Hi
There is a nylon / plastic drive between the motor and gearbox.Is it broken ?
Bryan
Re: September 2013 Engineers meeting
There is a charge of £70.00 to attend ?
Ignorance Lee .. You DON’T have to be a WTA member to attend as previously stated.. ALL the trade is welcome.. even you if you turned up.
Bryan
Re: hoover d/w module
Hi Paul
There are 2 different ones dependent on the serial number.
Both are in stock with GIAS and I can supply
Bryan
Re: September 2013 Engineers meeting
Were there any desserts? I didn’t see any…
That’s because geoff had them all, I lost count after the 6th starter and 4th main course 😛
Bryan
Re: Beko CDA543FW-2 fridge freezer air sensor replacement
Nope, that didn’t work. Not sure what to do next – maybe time to call in an engineer to look at it, or keep replacing parts until it’s fixed!
