allan73

Forum Replies Created

Viewing 15 posts - 181 through 195 (of 497 total)
1 2 3 … 12 13 14 … 32 33 34
  • Author
    Posts
  • June 4, 2011 at 11:44 am in reply to: Beko wm5140s board blown #351937
    allan73
    Participant

    Re: Beko wm5140s board blown

    just a quick update to this.
    Been back found pump windings complely burned out so replaced pump and module 😀

    Thanks Allan.

    ps. no sign of leaks onto pump.

    May 29, 2011 at 8:08 am in reply to: White knight CL93 dead #352392
    allan73
    Participant

    Re: White knight CL93 dead

    Thanks for the reply Gandh1.This M/c is completely dead no heat,no motor,no pump nothing could a cap fault cause this ?

    May 28, 2011 at 11:56 am in reply to: Beko WM 6152W #352303
    allan73
    Participant

    Re: Beko WM 6152W

    Thanks Colin :tup:

    May 27, 2011 at 7:17 pm in reply to: Beko WM 6152W #352301
    allan73
    Participant

    Re: Beko WM 6152W

    Any chance of a copy of that Cris ? :waving:
    Allan.

    May 25, 2011 at 6:35 am in reply to: Beko wm5140s board blown #351936
    allan73
    Participant

    Re: Beko wm5140s board blown

    I see where your coming from Mike,I’ve found that I’ve got a secondhand module for that model so I’ll try that after first inspecting m/c properly. 8)

    Allan

    May 24, 2011 at 9:56 am in reply to: hotpoint tdc 30p #352014
    allan73
    Participant

    Re: hotpoint tdc 30p

    I did one of these with Qualtex debor adhesive about 18mths back and didnt get a recall, pt no is mis01.

    Allan.

    May 24, 2011 at 9:00 am in reply to: Beko wm5140s board blown #351934
    allan73
    Participant

    Re: Beko wm5140s board blown

    Thanks for the replys 🙂
    Mike are you saying the motor (or even the interlock)could take the pump triac out,I did look at the motor quickly but didnt get the megger on it ?

    Allan.

    May 23, 2011 at 6:54 am in reply to: Beko wm5140s board blown #351931
    allan73
    Participant

    Re: Beko wm5140s board blown

    I would be gratefull for anyones help on this,I do’nt want to blow the new module.Thanks in advance.

    Allan.

    May 16, 2011 at 11:11 am in reply to: Diplomat spares #351297
    allan73
    Participant

    Re: Diplomat spares

    Account opened & part ordered 🙂

    Allan.

    May 16, 2011 at 11:07 am in reply to: Zanussi FL827 blocked air chamber #351367
    allan73
    Participant

    Re: Zanussi FL827 blocked air chamber

    Thanks Martin :tup:

    May 15, 2011 at 7:28 am in reply to: Zanussi FL827 blocked air chamber #351365
    allan73
    Participant

    Re: Zanussi FL827 blocked air chamber

    Cheers for the reply cris, I did cross my mind to replace it, I was just hoping someone might have a method for cleaning them without taking it off.Wishful thinking me thinks :rolls:

    Allan.

    May 13, 2011 at 10:31 am in reply to: Diplomat spares #351295
    allan73
    Participant

    Re: Diplomat spares

    Thanks Don. 8)

    May 13, 2011 at 7:05 am in reply to: wd440 nightmare #351154
    allan73
    Participant

    Re: wd440 nightmare

    Might be worth taking them off,it’s usually something on the motor side with those symptoms.

    May 12, 2011 at 11:14 am in reply to: ZWF1221w #350726
    allan73
    Participant

    Re: ZWF1221w

    What insulation readings did you get from the heater & motor, anything under about 40 megg could be causing problems ?

    May 12, 2011 at 11:03 am in reply to: wd440 nightmare #351152
    allan73
    Participant

    Re: wd440 nightmare

    Have you checked brushes and motor plug connections ?

  • Author
    Posts
Viewing 15 posts - 181 through 195 (of 497 total)
1 2 3 … 12 13 14 … 32 33 34