allan73

Forum Replies Created

Viewing 15 posts - 196 through 210 (of 497 total)
  • Author
    Posts
  • in reply to: Hotpoint wmd 960 no motor #350125
    allan73
    Participant

    Re: Hotpoint wmd 960 no motor

    Just had a thought on this, but I could be off the mark….could the heater going to earth after it’s been on a while currupt the board and cause no motor ?


    Allan.

    in reply to: More Consumer Woes #349737
    allan73
    Participant

    Re: More Consumer Woes

    We are Electrolux floor care agents and our e/lux contact complains that Argos regularly exchange vacuum cleaners that are either blocked or have broken drive belts. :rolls:

    Allan.

    in reply to: Indesit WIDL126suk open circuit heater #349926
    allan73
    Participant

    Re: Indesit WIDL126suk open circuit heater

    Thanks for the replys, I’ll check the weight hasn’t damaged any wires when it’s dropped off.

    Allan.

    in reply to: John Lewis Condenser Dryer with compressor? Need manual. #349913
    allan73
    Participant

    Re: John Lewis Condenser Dryer with compressor? Need manual.

    Jeez…..Good luck with that then 😉

    Allan.

    in reply to: Indesit WIDL126suk open circuit heater #349923
    allan73
    Participant

    Re: Indesit WIDL126suk open circuit heater

    Thanks for the reply Allsorts, I didn’t realise there was a time out fault code for heating on this model 😳
    Do you know if the hotpoint wf series have a fault code for this also ? I thought they just washed indefintely.

    Allan.

    in reply to: More Consumer Woes #349735
    allan73
    Participant

    Re: More Consumer Woes

    Regarding the m/c with “rising damp” I would imagine that is the customers interpretation after being told the m/c is being kept in a damp enviroment by the engineer. :rolls:

    Allan.

    in reply to: hotpoint aqxgf149 p1 #343469
    allan73
    Participant

    Re: hotpoint aqxgf149 p1

    Did you get to the bottom of this dealdd,I’ve got a similar fault to look at Monday ?

    Allan.

    allan73
    Participant

    Re: Servis dw m4405/b-I are these things even worth fixing

    Thought not…..

    in reply to: Indesit WIXL 163 suk pulses on fill etc #331436
    allan73
    Participant

    Re: Indesit WIXL 163 suk pulses on fill etc

    Emw didn’t have a board in so I directed customer back to Indesit under 5yr parts warranty. I spoke to the customers daughter a week or so later who confirmed they changed main board and all was well.
    Hope this helps

    Allan

    in reply to: crosslee whitenight may have a problem :( #346720
    allan73
    Participant

    Re: crosslee whitenight may have a problem 🙁

    Any word from Crosslee on this yet Loopey?
    I sell quite a few crosslee dryers so I’m interested in the outcome.

    Allan.

    in reply to: Indesit WIL103 #346661
    allan73
    Participant

    Re: Indesit WIL103

    Also a restriction in the outlet might cause that code as well I think.

    allan73
    Participant

    Re: bosh wfx1455gb/10 all the lights are on but nobody’s hom

    Martin ,your a star…. :angel:

    in reply to: Dear iadom (HPT WF…) #161583
    allan73
    Participant

    Re: Dear iadom (HPT WF…)

    Cheers Jim, :worthy:

    in reply to: Dear iadom (HPT WF…) #161582
    allan73
    Participant

    Re: Dear iadom (HPT WF…)

    Any chance I could have a copy also Jim ?

    Allan.

    in reply to: Ignis ADL155 dishwasher #345000
    allan73
    Participant

    Re: Ignis ADL155 dishwasher

    Surprises me Whirlpool are still using those askol pumps ❗

Viewing 15 posts - 196 through 210 (of 497 total)