Forum Replies Created
-
AuthorPosts
-
Applianceman2010
ParticipantRe: Evening gents ..
I will check with my wife for you tonight if you like? She is ACCA qualified tax specialist, she will tell you everything you need to know as i’m in a very similar situation to you and she does my books. 😉
Applianceman2010
ParticipantRe: Uploaded by Apart4u to Youtube
“All work must be carried out by a qualified engineer”….. Well why the hell are you making a video to show Joe public how to use it?? lol :rotfl:
Applianceman2010
ParticipantRe: Bosch Exxcel 1400 washing machine
It’s probably got a hair clip or something jamming it from cumming out/turning . You will have too tip the the machine in its back and take the pump off from behind the filter. Ps. Put a towel or something over the motor to stop any water getting on it. Hope this helps.
Applianceman2010
ParticipantRe: Which one to tackle first?
We’ve all been there but it never gets any easier…. making the decision of which one to do first that is lol flip a coin 😉
Applianceman2010
ParticipantRe: Electrolux ENB 40400X Freezer ok, Fridge not working
Assuming it is a blown air type (cold air from the freezer) i expect the channel that conveys the air is blocked with ice build up. Defrost for 24hrs and turn back on.If it happens again in the not so distent future then you have a bigger problem bit for now that would be my first step. 😉 hth
Applianceman2010
ParticipantRe: BOSCH ENR SGS5362GB/01
At the risk of sounding stupid but I don’t have access to all of the exploded diagrams etc. but is that the d/w with the measuring system on the side? (yellow pressure switch on top connection and red float switch on bottom)not measuring jug wheel type, if so I believe the connector blocks connect to the micro switch with the white cable ontop on both microswitches. Hth no idea if it will or weather I’ve got the wrong system.
Applianceman2010
ParticipantRe: Buying from the STORE
Sweet cheers k.!
Applianceman2010
ParticipantRe: Bosch Classixx 1000 turning at full speed WFL2063GB
Agreed ,sounds like a motor/tacho problem.
May 31, 2011 at 8:54 pm in reply to: Doesn’t Fill… H/point WMD960 Fitted EMW Part But Diff Prob #352598Applianceman2010
ParticipantRe: Doesn’t Fill… H/point WMD960 Fitted EMW Part But Diff
…. just from memory i had one not unlocking and coming up with F1 and it turned out to be the motor brushes were sticking in the holder…. worth a check maybe? 😐
Applianceman2010
ParticipantRe: Buying from the STORE
I’ve already got one, i was told it was all the same prices by one of the girls in the office 👿 djmorgan21547739@aol.com
Applianceman2010
ParticipantRe: FF80 temparatue issues
If the compressor is REALLY hot ie. you can’t keep your hand on it for more that a couple of seconts it could well be a “poor pumper” and will need to be replaced.But thats assuming that it hasn’t just lost gas.Id get a fridge expert to have a look at it.HTH
Applianceman2010
ParticipantRe: Buying from the STORE
Do i get that too if im good?…. 😆
Applianceman2010
ParticipantRe: Bosch WFO2864GB/01
I’m pritty sure its the PCB ,i have had a few of these, the arking of the motor brushes wearing down damages the PCB. On the digital display model i think it flashes F11. 😉
Applianceman2010
ParticipantRe: hoover optima oph714d
Just if you need a little more encouragement i had one last week exactly the same problem,changed heater works perfectly now.It was covered in limescale. Hope this helps 😀
Applianceman2010
ParticipantRe: Panasonic Microwaves – Inverter Reliability
from my experience with them if they work ,they work well but if the inverter goes…. expect to replace it . hope this helps
-
AuthorPosts
