Forum Replies Created
-
AuthorPosts
-
bassman
ParticipantRe: Hotpoint DWF31N Dishwasher
Thanks for info but the PCB is burnt out beyond repair.
Thanks Bassmanbassman
ParticipantRe: Hotpoint DWF31N Dishwasher
Thanks for the info Iadom where does my customer stand with this machine it is only 4 years old and now unrepairable will hotpoint be responsible for replacing it? I thought there was a law that appliances should be fit for purpose which surely means lasting longer than this.
I have told them to get advice from trading standards and then contact Hotpoint, Does anyone now what the situation is regarding these problemsbassman
ParticipantRe: Any good software for Jobs
Service Base is the one to go for it does every thing you need call logging spares, invoicing . I don,t know why everyone is not using it it reasonably priced and very easy to use you can look up jobs by Invoice number, address, post code, model number, job number, telephone number.
what more would you want.
I use the lite versionbassman
ParticipantRe: virus/spyware
I gave up on Norton it slows the computer down and will not accept emails with large files attached I now use AVG its free and never had a problem with it.
Bassmanbassman
ParticipantRe: De Deitrich oven
Thanks for the info Guys I contacted De Deitrich and they sent me a manual straight away .
Bassmanbassman
ParticipantRe: Indesit Dishwasher DI62uk
Thanks for info Chris I will go back this week and check.
Bassmanbassman
ParticipantRe: Indesit Dishwasher DI62uk
Just had A look on connections there is a thermistor it looks the same as a button stat . I will have to go back and check resistance anyone know what reading i should expect to find.
Thanks Bassmanbassman
ParticipantRe: Indesit Dishwasher DI62uk
Thanks Chris but I could be mistaken but there was a stat at the right hand rear of the machine and what looked like two stat at the front left of the machine is one of these a thermistor it looked like a button stat but was in a housing so I could not see it properly. have yuo got the part number for the thermistor
Thanks Bassmanbassman
ParticipantRe: Siemens Washer /Dryer
I have recently installed a Bosch fully intergarted washer dryer and it was definately a Smeg.
bassman
ParticipantRe: De Deitrich oven
I have just found the web site I was hoping to download a user manual but the site is useless.
bassman
ParticipantRe: Robbing Barstewards
I have just changed to alliance and leicester from barclays my wife has an alliance and leicester business account and it works fine so I have decided to save some money and switch too.
bassman
ParticipantRe: Ariston CD12 Washer Dryer Door Gasket
I just looked at my order on connect the gasket was a 035772
bassman
ParticipantRe: Ariston CD12 Washer Dryer Door Gasket
Thanks Chris i will check the part number in the morning but the gasket looked identical to the old one.
bassman
ParticipantRe: Vacuum Bosch extraxx 17
Ive had these where the cable breaks from the body to the brush roll its worth checking and is easy to do just take right hand cover off the side of the swivel head looking from the front if you look on the side of the machine there is a clip you push in to remove cover there are a pair of wires under there that break .
bassman
ParticipantRe: Indesit WD12uk
Thanks Tony I have allready purchased one from you the old one is on its way back to you.
The cause was the customer was using bleach in the machine which was causing suds to build up in machine which comes out of vent hole in the dryer fan chamber this then drops onto the PCB blowing the tracks. -
AuthorPosts
