Forum Replies Created
-
AuthorPosts
-
September 6, 2015 at 3:58 pm in reply to: Zanussi ZWT71401WA (914606024) Washer/Dryer- Drying Problem #430047
bazza500
ParticipantRe: Zanussi ZWT71401WA (914606024) Washer/Dryer- Drying Prob
He said the ducting into the drum. I took that as being the heater ducting. I’m on about the condenser at the back.
September 6, 2015 at 3:32 pm in reply to: Zanussi ZWT71401WA (914606024) Washer/Dryer- Drying Problem #430045bazza500
ParticipantRe: Zanussi ZWT71401WA (914606024) Washer/Dryer- Drying Prob
Choked condenser?
bazza500
ParticipantRe: Whirlpool Top Loading Washer (3RLSQ8033SW0)
If my memory serves me right there is an internal in line fuse in these. It is just in the wiring loom under the control panel in one of those twist to open holders.
August 21, 2015 at 7:39 pm in reply to: Tricity Bendix Hob TBC650BL Hob Pnc 949590770 Terminal block #429766bazza500
ParticipantRe: Tricity Bendix Hob TBC650BL Hob Pnc 949590770 Terminal b
Seems to be 3304606208 but not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} on this one
bazza500
ParticipantRe: Electrolux Washer Dryer Prod No. 91460600(01)
Mark have you checked the dryer element insulation? If it’s low it gives these symptoms.
Can’t say I’ve ever had one giving random lights. Have you tried putting it into diagnostic mode?
bazza500
ParticipantRe: John Lewis E52?
I had this Jim. Eventually replaced the motor and it’s worked ever since. I think it may have been the insulation reading getting low when the motor heated up.
bazza500
ParticipantRe: Electrolux Washer Dryer Prod No. 91460600(01)
That product number doesn’t exist
bazza500
ParticipantRe: gorenje w6223 pcb wanted
In stock at connect
bazza500
ParticipantRe: Zanussi D/w ZDT12011FA – 911 539 107 – overfilling
140000554067
bazza500
ParticipantRe: Zanussi D/w ZDT12011FA – 911 539 107 – overfilling
It needs the pressure sensor modification done.
bazza500
ParticipantRe: Weird part descriptions
kwatt wrote:Sorry Barrie, you got well beat there. 😉
K.
Well I gave to disagree. I reckon mine stuffs his.
bazza500
ParticipantRe: zpw 16070w door locks but wont start
Check heater for earth fault.
bazza500
ParticipantRe: Christmas 2015
Then I’m in.
bazza500
ParticipantRe: Christmas 2015
Does it have a bar?
bazza500
ParticipantRe: Zanussi ZDT12011FA
If you change the pressure switch it will only last weeks. The mod kit is fitting an air trap to the sump. Very easy and takes 10 mins at most.
-
AuthorPosts
