bazza500

Forum Replies Created

Viewing 15 posts - 1,021 through 1,035 (of 1,916 total)
1 2 3 … 68 69 70 … 126 127 128
  • Author
    Posts
  • December 1, 2009 at 6:24 pm in reply to: AW23 flimsy bolts? #305388
    bazza500
    Participant

    Re: AW23 flimsy bolts?

    I am also waiting on a left hand weight. Machine has done exactly the same as the picture although the weight also tore through the doorseal.

    December 1, 2009 at 6:17 pm in reply to: Oven tripping electric supply #305216
    bazza500
    Participant

    Re: Oven tripping electric supply

    The reading between Live and Earth is the insulation reading and in your case is too low. The element will be tripping your electrics.

    December 1, 2009 at 1:12 pm in reply to: Oven tripping electric supply #305214
    bazza500
    Participant

    Re: Oven tripping electric supply

    If the 500K you are talking about is an insulation reading( which I think it must be) then the element is the problem.

    The resistance reading should be 20-50ohms(ish).

    December 1, 2009 at 12:17 pm in reply to: Comet Engineers #305350
    bazza500
    Participant

    Re: Comet Engineers

    I don’t think this conversation is worth discussing. 😕

    November 30, 2009 at 3:50 pm in reply to: Oven tripping electric supply #305211
    bazza500
    Participant

    Re: Oven tripping electric supply

    Any electrical or mechanical part can fail. If everything lasted 12 months or more there would be no warranty calls on any appliance with a years guarantee. To be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure you would need to insulation test the element however I would doubt any DIYer would have the equipment to do this. I am only basis my diagnosis on what you have written and my experience. With that I am saying it is 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} chance your element is causing the fault.

    November 29, 2009 at 1:40 pm in reply to: Oven tripping electric supply #305209
    bazza500
    Participant

    Re: Oven tripping electric supply

    The element will be the problem.It will be going to earth once it gets hot.

    November 29, 2009 at 1:14 pm in reply to: Servis Module #305204
    bazza500
    Participant

    Re: Servis Module

    Do you have serial number of appliance?

    November 26, 2009 at 2:26 pm in reply to: ctd80 element #304944
    bazza500
    Participant

    Re: ctd80 element

    c00258828

    November 25, 2009 at 2:54 pm in reply to: WHIRLPOOL AWM5104/05. #304841
    bazza500
    Participant

    Re: WHIRLPOOL AWM5104/05.

    481241888051 drawer and 481249878652 handle

    November 25, 2009 at 12:16 pm in reply to: Hoover Washer/dryer door boot HDW 110 M UK #304830
    bazza500
    Participant

    Re: Hoover Washer/dryer door boot HDW 110 M UK

    Do you have the product code? (first part of the serial number)

    November 24, 2009 at 2:25 pm in reply to: Creda 48305 fan element #304737
    bazza500
    Participant

    Re: Creda 48305 fan element

    Or what about this….

    http://cgi.ebay.co.uk/Creda-Etc-Fan-Ove … 35a4fc7ac5

    November 24, 2009 at 2:23 pm in reply to: Creda 48305 fan element #304736
    bazza500
    Participant

    Re: Creda 48305 fan element

    I’m only guessing here….but would an 6204370 not fit. Same centre screw fixing. Don’t know about diameter though.

    November 23, 2009 at 5:50 pm in reply to: Servis 1600 washing machine model 6006 spinning constantly #304606
    bazza500
    Participant

    Re: Servis 1600 washing machine model 6006 spinning constant

    Almost always the module

    November 23, 2009 at 5:48 pm in reply to: White Knight filter #304631
    bazza500
    Participant

    Re: White Knight filter

    421309217821

    November 21, 2009 at 6:39 pm in reply to: Hotpoint TDL11P #304363
    bazza500
    Participant

    Re: Hotpoint TDL11P

    or Mistress 😀

  • Author
    Posts
Viewing 15 posts - 1,021 through 1,035 (of 1,916 total)
1 2 3 … 68 69 70 … 126 127 128