bmrenr

Forum Replies Created

Viewing 15 posts - 76 through 90 (of 180 total)
1 2 3 … 5 6 7 … 10 11 12
  • Author
    Posts
  • May 14, 2012 at 9:04 am in reply to: Bosch wfd2060gb/01 bearing cross #374843
    bmrenr
    Participant

    Re: Bosch wfd2060gb/01 bearing cross

    Cheers Martin would you have the sizes of the bearings and seal and I might be able to make it up out of some kits in my shed as the customer is in a hurry.

    Tom

    May 13, 2012 at 5:17 pm in reply to: Bosch wfd2060gb/01 bearing cross #374841
    bmrenr
    Participant

    Re: Bosch wfd2060gb/01 bearing cross

    Cheers Martin I would appreciate that.

    Tom

    April 16, 2012 at 8:20 pm in reply to: Creda programme 600 carefree solar plus dead #373350
    bmrenr
    Participant

    Re: Creda programme 600 carefree solar plus dead

    Cheers Colin was going to start there.I was just checking to see if this was an issue with this cooker .

    Tom

    April 16, 2012 at 7:00 pm in reply to: Indesit widl 102 micro temp #373285
    bmrenr
    Participant

    Re: Indesit widl 102 micro temp

    Went to this call today 40mile round trip and no one home and would not answer the phone.Thanks again for the help Jim.

    Tom.

    April 16, 2012 at 6:17 pm in reply to: Whirlpool akz 196 oven won’t turn off #373312
    bmrenr
    Participant

    Re: Whirlpool akz 196 oven won’t turn off

    Cheers John

    Tom.

    April 15, 2012 at 9:12 pm in reply to: Indesit widl 102 micro temp #373283
    bmrenr
    Participant

    Re: Indesit widl 102 micro temp

    Cheers Jim I am going to this m/c tomor The prob is its not heating on the drying cycle and I’m thinking it might be the micro temp.I have a few in the van and wanted to check if I had the right one but like you say I can check when I get there that is if that is what’s wrong.

    Tom.

    March 29, 2012 at 11:16 am in reply to: Tricity Bendix tm471 t/d belt replacement #372277
    bmrenr
    Participant

    Re: Tricity Bendix tm471 t/d belt replacement

    Cheers Jim I have it sorted you confirmed what I was thinking it was very tight though.Yes very nice weather for it.

    Tom.

    March 4, 2012 at 9:52 pm in reply to: Zanussi TC7102W Timer wont stop at zero #370307
    bmrenr
    Participant

    Re: Zanussi TC7102W Timer wont stop at zero

    Cheers Martin thanks for the reply

    Tom.

    February 4, 2012 at 12:17 am in reply to: Hotpoint wmf740 tripping #368198
    bmrenr
    Participant

    Re: Hotpoint wmf740 tripping

    Cheers Martin sorry for not replying earlier you were right there was a leak to earth from commutator.

    Tom.

    January 16, 2012 at 9:24 am in reply to: Creda 48445 Clock #367324
    bmrenr
    Participant

    Re: Creda 48445 Clock

    Yes please Jim if you can.

    Cheers,
    Tom.

    January 15, 2012 at 10:42 pm in reply to: Creda 48445 Clock #367322
    bmrenr
    Participant

    Re: Creda 48445 Clock

    Cheers

    Tom

    December 22, 2011 at 4:22 pm in reply to: Bosch sgi6615gb/07 #366019
    bmrenr
    Participant

    Re: Bosch sgi6615gb/07

    Hi Martin yes if I reset the m/c it drains out but when I select another cycle all I can hear is this clicking no drain out pump going as always at the start of cycle.circulating motor turning freely . I have found the part no for this starting relay its 169326 I’m just wondering if this is my prob or is it something else
    Tom

    December 13, 2011 at 1:47 am in reply to: Zanussi ZBQ 865N user manual #365367
    bmrenr
    Participant

    Re: Zanussi ZBQ 865N user manual

    Cheers Colin its tght@eircom.net
    Tom.

    November 16, 2011 at 9:47 pm in reply to: Hotpoint wf541 jumping #363756
    bmrenr
    Participant

    Re: Hotpoint wf541 jumping

    cheers guys, thanks for the replies.

    October 28, 2011 at 10:16 pm in reply to: Hotpoint rl88s freezing up #362342
    bmrenr
    Participant

    Re: Hotpoint rl88s freezing up

    Cheers Nige.

    Tom.

  • Author
    Posts
Viewing 15 posts - 76 through 90 (of 180 total)
1 2 3 … 5 6 7 … 10 11 12