bmrenr

Forum Replies Created

Viewing 15 posts - 91 through 105 (of 180 total)
  • Author
    Posts
  • in reply to: Whirlpool AKZ ovens #129844
    bmrenr
    Participant

    Re: Whirlpool AKZ ovens

    Hi guys Iv got to call to one of these m/cs the fault is its dead.Its an AKZ154/NB service no 858515415030 .Could this be related to these resistors.All help greatly appreciated.

    Tom.

    in reply to: Beko sc1521w wiring #361932
    bmrenr
    Participant

    Re: Beko sc1521w wiring

    Hi Colin its tght@eircom.net

    Tom.

    in reply to: LG Door Slack #313162
    bmrenr
    Participant

    Re: LG Door Slack

    Cheers guys

    Tom.

    in reply to: LG Door Slack #313158
    bmrenr
    Participant

    Re: LG Door Slack

    Hi Phidom did you manage to sort this problem. I was called to one of these m/cs two weeks ago where the retainer had come off so I just put it back on but now the customer says its off again .Is this a common prob on these m/cs?

    Tom

    in reply to: whirlpool awz8577 tumble dryer #360306
    bmrenr
    Participant

    Re: whirlpool awz8577 tumble dryer

    Hi guys just to let ye know I replaced the capacitor but the m/c is still not working so the customer is buying a new m/c.

    Tom

    in reply to: whirlpool awz8577 tumble dryer #360305
    bmrenr
    Participant

    Re: whirlpool awz8577 tumble dryer

    Cheers Martin I seen this last night and of course I tried it but no luck so I had a look at the circuit board and there was a domed top to a 1000uf capacitor.I will order some and post my results.

    Tom.

    in reply to: Indesit IDL 535 tablet dispenser #356810
    bmrenr
    Participant

    Re: Indesit IDL 535 tablet dispenser

    Cheers Scientist I had asked her all these questions and she said there was nothing blocking it and the door was opening but when I called the door was being released ok but was not opening fully because the spring had come out of position.

    Tom.

    in reply to: zanussi tde4234w error codes #355783
    bmrenr
    Participant

    Re: zanussi tde4234w error codes

    Hi Dave my email is tght@eircom.net thanks greatly appreciated.

    Tom.

    in reply to: Fisher pakel drawer dishwasher dd603 #350519
    bmrenr
    Participant

    Re: Fisher pakel drawer dishwasher dd603

    Cheers guys thanks for the info Dave.

    Tom.

    in reply to: Cancel programme on Indesit wia 101 #348883
    bmrenr
    Participant

    Re: Cancel programme on Indesit wia 101

    Cheers Tim was at this m/c on fri and tried both but no joy.

    Tom.

    in reply to: Hotpoint bwm129 error codes #348181
    bmrenr
    Participant

    Re: Hotpoint bwm129 error codes

    cheers jim. 😀 😀

    in reply to: fdl 780 error codes #347967
    bmrenr
    Participant

    Re: fdl 780 error codes

    Cheers Jim

    Tom

    in reply to: fdl 780 error codes #347965
    bmrenr
    Participant

    Re: fdl 780 error codes

    Sorry Iadom its a hotpoint fdl 570 I had just been reading your post on the known error codes on fdf 780 before posting my question so got them mixed up.

    Tom.

    in reply to: Diplomat/whirlpool ADP8500 854500115740 #345981
    bmrenr
    Participant

    Re: Diplomat/whirlpool ADP8500 854500115740

    Hi I had this pulsing prob on a w/p d/w and changed the rectangular capacitor on the module and this sorted it.

    Tom.

    in reply to: Hotpoint WF101 flashing prewash light #341929
    bmrenr
    Participant

    Re: Hotpoint WF101 flashing prewash light

    Hi peeler did you get this sorted.I am going to same m/c with same prob on sat.

    Tom.

Viewing 15 posts - 91 through 105 (of 180 total)