Forum Replies Created
-
Posts
-
Re: electrlux ewf14108w
Yes that was what was wrong one of the wires to motor was broken inside the insulation would not have spotted it only for chris giving me the error code cheers guys
Tom.
Re: Electrolux Insight EWF14108W – Strange fault
Cheers Mike have changed the element but still the same I forgot to say this is an intermitant fault as it does not happen every time the customer uses the m/c .
Tom.
Re: Electrolux Insight EWF14108W – Strange fault
Hi Rob did you ever find out what was causing this as I have the same m/c with the same prob .does anyone know how to get into dignostis on this m/c. All help or advice greatly appreciated.
Tom.
Re: Miele s5210 vacuum cleaner
Cheers guys I managed to solder a leg onto it and the vacuum is running again but is very noisy sounds like the motor is on its way out. would I be right or is there anything else im missing.
Tom.
Re: whirlpool awod 4305
Thanks Steve but the customer said this stopped mid cycle.I have checked the known error codes but all I can find are codes for m/cs with digital display.The lights that are on are from left to right are 3,4,5 and the service light.This call is over thirty miles away so if I knew what this code was I could take the part with me rather than making two trips.Any ideas guys? email is tght@eircom.net if someone has the error codes
Tom.
Re: electrolux ewf 14108w washing machine
Hi just to let ye know how I how I got on. I went out and started the cycle and the m/c overfilled ( which the customer never mentioned) and the drum turned a few times and then aborted the cycle and pumped out the water.It turned out that the screw holding the pressure chamber to the drum had come lose and fallen off and so the pressure chamber had dropped down, so screwed it back on and worked perfect.Thanks again for your advice its greatly appreciated.
Tom.
Re: electrolux ewf 14108w washing machine
Just trying to get a head start Jim was hoping someone else had come across this before. I know I should have got the pnc no. I hav rang the customer back for this but she not answering her phone .Does anyone hav info on how to enter dignostis mode on this model.
Tom.
Re: Hotpoint DF23 Dishwasher no fill
Cheers Tim you were spot on I did have a look at them and as you say looked ok but after your reply I had a closer look and sure enough one of the wires was broken . Thanks again.
Tom
Re: whirlpool awz410
No Martin checked that already but can only go on one way . I will order a timer.
Tom.
