Forum Replies Created
-
Posts
-
Re: Indesit washing machine
have a quick read here.
trade-technical/hotpoint-indesit-pressure-switch-reset-t69601.html#p341650Bob.
Re: hotpoint aqualtis AQCF852B1UK Tumble Dryer
do you have the serial number as there was a bulletin out about this.
Bob.
Re: app2540 cooker hood
was it not in recirculation mode. ?.
and one wonders why the motor failed.bob.
Re: hoover washer optima oph714d
back to the basics, no power to fill valve it shuts off unless it it blocked open by debris in the valve,
fill valves normally fail safe.please insulation check the appliance after you have checked the fill valve operation is correct.
Bob.
Re: hoover washer optima oph714d
both e02 and e04 relate to over filling problems, if the appliance is disconnected from the mains the valves should stop filling.
Bob.
Re: hoover washer optima oph714d
if the water valves switch off when you unplug the machine they are working ok.
have you done a full insulation check on the motor and heater ?, if they are ok i would presume its the selector switch or the pcb.
Does it show any fault code ?.bob
Re: Microwave leakage testing
best dig out that old tester.
please do give out the name of the brands effected.
Bob.
Re: Microwave leakage testing
in all the times i did microwave repairs and it was somtimes 10 a day, i have only failed 2 for leakage and they both had the inner door grid missing, so a good visual check and pat test should be ok, but as lee8 suggests it may be part of the requirement for insurance, the leakage detecters are not really an expensive piece of test equipment so if you can get a few landlords on board its worth the investment.
Bob.
