[BobHope]

Re: Hoover HNWF3137 – 31000638

that motor is driven from the coreboard, try tapping the relay with a screwdriver when you hear it click it might just conferm it is faulty, that model also has a dryer pcb so worth a look at that too.

Bob.

[BobHope]

Re: HEDS 668S Hoover dishwasher

hi TC,
email sent withsome info.

Bob.

[BobHope]

Re: Hotpoint FF200

Email sent with info to your works email addy.

Bob.

[BobHope]

Re: user manual for PROLINE IH680P-U induction hob

PM me an email address and i will send it for you.

Bob.

[BobHope]

Re: Thermostat Capillary Tubes – Sheathed or Bare

the sheath is an added protection for the capillary and the user, just a note on replacing a LEC thermostat with a ranco stat, somtimes the off position is 90 degrees out so you have to adjust the control knob. plug out first.

Bob.

[BobHope]

Re: Hotpoint FF200

Hi Geoff,

there is 18 models with that model no. to send you the correct info please post up the commercial code and seriel number.

Bob.

[BobHope]

Re: hoover SV23 001 low heat

looking at the circuit diagram that heater element is wired in parralel, the high/low heat is selected from the front panel switch it just shorts out the low temp cut out and uses the high heat one, if you want the diagram pm me your email.

Bob.

[BobHope]

Re: What’s this component on Miele W504 board?

Hi Mike,

just love your repair storys, and nice to here from someone who still repairs to componat level, without having a zoomed out picture of the pcb to see other componats around the red box i would say that its a pulse transformer, Used in SCR and TRIAC starting circuits of low, medium and high powers.

Bob.

[BobHope]

Re: Hood stopped working

hi nina,

you say it stopped working, do the lights work, is there any noise or buzzing from the fan housing.

Bob.

[BobHope]

Re: Hoover HNL662 PCB popped

have you got the componant layouts and connection chart Jim ?, its handy as it shows which triac powers what componant, if not i can forward it.

Bob.

[BobHope]

Re: Hoover HNL662 PCB popped

i wood change both of them just incase, its quite a common problem but normaly you can see melted or distorted plastic on the pump.

Bob.

[BobHope]

Re: beko cooker d533 toc

Hi gordy29,

pm me your email and i will send the info.

Bob.

[BobHope]

Re: annoying customers kids

what chance has the door glass got if you do get it fitted, bet you dont reach it back to your getaway vehicle before its gone again. LOL.

Bob.

[BobHope]

Re: Stoves cooker 600 DFDOA 050554503

i dont know about the kits they were preordered for the job, its the circuit diagram thats realy needed.

Bob.

[BobHope]

Re: Stoves cooker 600 DFDOA 050554503

hi winker,

the only one i ever did took me 2.5 hours to do, but i did have both kits with me, it is quite easy once you work out which is the correct kit/wiring diagram for the model you are working on.

good luck.

Bob.

[Author]

Posts