Forum Replies Created
-
Posts
-
Re: Large capacity drums putting holes in clothes?
Was it a non-standard sized drum capacity Graham?
Not too sure of the drum size, quite a new candy type machine.
I have the Miele honycombe drum and no problems here. My wife thinks it doesn’t wash as good as the last machine, Hotpoint WMA! Another subject….
GraemeRe: Large capacity drums putting holes in clothes?
Had a Hoover 1200 spin ripping clothes this week, no bra wire in tub.
Had a look; It was all lycra type, all delicate wash stuff. After 10 mins the lady said she re-spun everything on the cotton wash. There is only a small gap from the heater bracket to the tub, prob forcing through.Graeme
Re: hotpoint df dishwashers
If you can take the left side off, pull the hose off the syphon chamber and pump into bowl. Have had a couple of re-calls due to glass / plastic stuck in this pipe.
GraemeRe: Td Drum rubbing
Because it’s rubbish.
We sold one to a regular customer, it ripped an item of clothing on the first use due to the gap at the front.
The fluff builds up due to the gap, it just dosn’t seal properly, also had a facia melt due to heat escaping from the front. Maybe best to put a washer on the drum before it’s sold 😯
GraemeRe: zanussi IZ16 91451300500 wash rinse spin lights
Thanks to Cliff and Chris, will have to change my email account, has a 5mb attachment limit, a bit mean.
If i read this correct i have E38 “pressure chamber blocked”.
Obviously will return to check Monday. The fault table says E38 does not stop the programme, heat phase skipped. Anyone know otherwise?Cheers
GraemeRe: zanussi IZ16 91451300500 wash rinse spin lights
Sorry to bounce this Chris.
I have no file, tried to PM you but the mail is stuck in the outbox.
Have you a problem wih the PM service?
If you could post anyhing to geservices@supanet or give me a brief rundown of the content it would be appreciated.
GraemeRe: zanussi IZ16 91451300500 wash rinse spin lights
Chris, it says “Your Inbox is 0{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} full”??
please send to geservices@supanet if there is a problem.
Thanks, GraemeRe: Zanussi ZX55/4W fridge not getting cold
Hi,
Prob blocked vent. I turn the defrost timer at rear to defrost to check element ok. If element is fine i change the timer (£20) and defrost with hairdryer. Easy to miss return vent under condensor.
Cheers
GraemeRe: Belling XOU188 cooling fan motor
Thanks Chris,
Only fitted a few gen zanussi and creda, do the pattern ones fit ok, which one do you carry?
Graeme
