cab

Forum Replies Created

Viewing 15 posts - 211 through 225 (of 423 total)
  • Author
    Posts
  • in reply to: Zanussi DE6854 #206282
    cab
    Participant

    Re: Zanussi DE6854

    Hi
    Check you inbox!

    cab

    in reply to: Zanussi DE6854 #206280
    cab
    Participant

    Re: Zanussi DE6854

    Hi, check your pm.

    cab

    in reply to: Zanussi TD520 T/D #204047
    cab
    Participant

    Re: Zanussi TD520 T/D

    Soz Jim thought you meant felt seal that the drum runs on this wears which causes a gap to appear and clothes get caught. I cant find the service bulliten but I carry the part. Part no. 50272165007

    cab

    in reply to: Zanussi TD520 T/D #204045
    cab
    Participant

    Re: Zanussi TD520 T/D

    DID YOU FIT A MODIFIED SEAL AND BEARING PADS?

    CAB

    in reply to: ZAN FJS1397 #205800
    cab
    Participant

    Re: ZAN FJS1397

    you have mail

    cab

    in reply to: LG door gasket #205471
    cab
    Participant

    Re: LG door gasket

    yes the front panel needs to come off. to refit the spring I tie a piece of wire to the hook end loosen a weight bolt, wrap the wire around the weight bolt then tighten it, lets you use both hands to pull the spring down.

    cab

    in reply to: electrolux f/f er 7926/1b #205466
    cab
    Participant

    Re: electrolux f/f er 7926/1b

    this model isnt like the very tall f/f with the evaporator in the freezer roof, its more traditional evaporator in back of freezer so it could be not defrosting it has a mechanical defrost timer, or the defrost channel is blocked.

    cab

    in reply to: Tricity DH090 #205230
    cab
    Participant

    Re: Tricity DH090

    Hi syphon tubes blocked, under the dome in the filter, search forum, its common.

    cab

    in reply to: Sarena oven #204757
    cab
    Participant

    Re: Sarena oven

    hi I have been to one this week aswell, this was one of the complaints I called for I have ordered a new timer unit (other stuff aswell)
    It doesnt say in the instructions anything about changing the volume, its probably normal, my customer burnt her dinner because she didnt hear it!

    Could pose a saftey issue! 😯

    cab

    in reply to: wet clothes #204818
    cab
    Participant

    Re: wet clothes

    hi looking at the sequence charts if dry is selected it does whats called TAP TEST. takes in a small amount of water, but if its filling to normal level its gone daft!, has the machine been repaired previosly, was wondering if the wrong configuration code was imputted would it cause this. Does it store any fault codes.

    cab

    in reply to: AEG 91123253403 #204647
    cab
    Participant

    Re: AEG 91123253403

    does have an iwms.

    check your mail.

    cab

    in reply to: White Knight CL767c No heat #204220
    cab
    Participant

    Re: White Knight CL767c No heat

    DRUM OUT JOB!

    CAB

    in reply to: Bendix BWD1012 #204231
    cab
    Participant

    Re: Bendix BWD1012

    hi was it trying to go into spin on wash? try the tacho loose in motor quite common on these.

    cab

    in reply to: Zanussi ZWX1605W #204019
    cab
    Participant

    Re: Zanussi ZWX1605W

    you have mail 😀

    cab

    in reply to: sat nav #202771
    cab
    Participant

    Re: sat nav

    my van is in being repaired, got gaffers van aMerc Vito its got sat nav built into the radio. its just got a basic black and white diplay only works on street names buts its pretty good, might see if I can keep his van!! Are you reading this Kev?

    cab

Viewing 15 posts - 211 through 225 (of 423 total)