[clivejameson]

Re: Zanussi ZERD7446

thanks Dave 🙂

[clivejameson]

Re: Computer help needed. Argh!!

cookerfit wrote:
Of course, XP doesn’t have Config.sys and typing it into configt.nt isn’t having any effect.

Cookerfit

Isn’t the equivalent on XP start > run > msconfig?

[clivejameson]

Re: jackson topline cooker

sorry Poppy….i grabbed the number off an old catalogue 😳

their current number is 029 2049 6816, and their website is here http://www.kitchen-economy.co.uk/

[clivejameson]

Re: jackson topline cooker

Hi Poppy

You might like to give Kitchen Economy a ring on 01222 451222

They keep a good range of bits and pieces, if they don’t have the original knob they may well be able to supply an alternative.

[clivejameson]

Re: Bosch wfl120gb/12

Just an update….the pcb was the only fault, thanks Martin and smartin.

[clivejameson]

Re: Smeg DI612 Error Code 2

….besides which Myke if your machine is filling too quickly (which can cause problems with the timed ‘top-up’) then there is an adjustment to be made on the circuit board to reduce the length of time for the top-up :lesson:

[clivejameson]

Re: Smelly Ice

Is it the cynic in me that suggests an independant laboratory might be required to test the water, before and after freezing? 😉

[clivejameson]

Re: Can a dishwasher be left unused for long periods

indeed….they are a bit like cars, once there is some wear and tear then they don’t like standing for weeks months without being used 🙁

[clivejameson]

Re: Help Please – De Dietrich VZ9996U1 Not Rinsing Properly

If the deposit on the glassware is a fairly uniform coating then another possibility is the softener is at fault….if it’s valve isn’t shutting off correctly then it will deposit salt on the crockery giving a cloudy deposit. This is easy to check by tasting it (!)

If that’s the case then the cheap answer is not to refill it with salt (you say you live in a soft water area) but use the 3 in 1 tablets instead just in case youe water supply isn’t completely soft.

[clivejameson]

Re: SMEG DWF66 – diagnostics

Hi Alistair

You can usually detect an intermittant soap dispenser by checking the coil for continuity whilst gently bending the contacts back and forth a little. If the coil is faulty the circuit will disappear!

Don’t forget, plug out before doing any work :zap:

[clivejameson]

Re: Moral problem ? or business sense ?

iadom wrote: it is the middle class and the nouveau rich that get up my nose most of the time

Jim.

I have to agree….my patch is probably one of the most affluent in the country and I’ve met numerous seriously wealthy customers (the one’s with titles, country estates and house/boats all around the world) and they generally are some of the nicest people you could meet. The customers who have made a million or two themselves tend to be the more unpleasant ones. A sweeping generalisation maybe, and there are always exceptions but it’s still an abiding impression i’m left with.

[clivejameson]

Re: black gunk

kwatt wrote:

Craig, who has a BSc in environmental health (too dumb to be called an engineer though :snigger:)

K.

:snigger: 😆 🙄

[clivejameson]

Re: New ISE user has arrived !!

and congrats from me too….your life will be financially poorer but immeasurably richer in other ways! 😀

[clivejameson]

Re: SMS4472GB/20 no water in

If the delay timer has failed preventing the machine from operating then you wouldn’t get any humming noise at all.

Sounds silly but have you checked the obvious like taps not turned on or fill hose kinked?

Is the humming noise the drain pump running perhaps….or is it the sound of the inlet valve trying to let water in?

[clivejameson]

Re: Whats the most annoying thing customers do?

me…..’Hello madam, i’ve come to repair the oven’…..

customer…..’Here’s the oven, i’ll just turn the grill off for you’

👿

[Author]

Posts