Forum Replies Created
-
Posts
-
Re: Hoover Washer
so dave
are we saying yes fault(s) identified by all lights flashing,
but via elimination we might clear fault condition?
Re: Hoover Washer
martin
many thanks
heater cutting in and taking currect current
inlet valves all operating
drain pump@: client has cleared coin blockages prior to my vist, although on my test water evacuated fine and continued into spin cycle without problems.
door interlock i would presume is ok as programme selection and action are as normal, until 30 minutes of cycle.
Do you have error codes for this model
thanks
Graham
Re: Neff U1421N2GB/01
many thanks guys..who said life was a bore
I will take up both options up on my return from a well earned break
at least appliance should be back to original spec.
Graham
Re: Neff U1421N2GB/01
so do we have a straw pole on what is the correct rectification method.
1] trusty hammer method
2] replace with new neff hindges
press your red button if you have one.
guys aint sure i have a trusty hammer, I was always trained ( 5 year appenticeship) to use the correct tool. not to say i have never used a trusty hammer in the past, but it tended to be on a bit of conduit in my sparky days.
well i am jetting off to tenerife this week, so i will let the problem lie for a couple of weeks
thanks for suggestions so far
Graham
Re: Bosch WFL2060 still having problems
thanks guys
was expecting a suspected timer… as each programme selection varies when selected a second time, nothing is constistant with fault pattern
any idea of cost new timer unit,machine is just under 3 years old so might be worth saving from the tip
Graham
Re: Neff U1421N2GB/01
many thanks
your right they are diificult to test, i must admit they appear to be alright.
will order new setregards
Graham
Re: bosch WFL2060
thanks dave
so with pressure pipe removed from switch, i should be able to get longer period of water intake, until i isolate power!
Re: TEKA ELECTRIC OVEN SPARES
thanks
i trust that includes vat!
what a rip off how can they justify such an price.
looks like a new oven will be the best option
Re: stoves oven
dave
many thanks
what is perplexing about this repair is the fact the fan was working fine, although noisy before i dismantled and fitted new motor.
with power off, how on earth can PCB blow.
looking at the wiring diagram the live feed is from PCB via door interlock and solinoid valve, I am revisiting to do continuity check on wiring
GrahamRe: stoves oven
yes bryan it is friday pm, but i am not affected by the day of the week I think, although I was in london on the thursday stuck in a car park, called regents street for 2 hours after the bomb scares.
back to early problem on wednesday last
door is closed,timer is in manual mode, motor hovers ( very very slow motion of fan) as if start windings are trying to kick in, but only whilst ingnitor is sparking up, when main gas burner is lit, motor ceases to show any motion. and no voltage!graham
Re: samsung washer
mike
re-visited client, test proceedure runs part way through and than pops up with E8..
checked clients handbook machine has 5 year parts warrenty..calling the camera people. labour only cost
many thanks.
goodthing about the job was the fact it was only 4 doors away from mine.
Graham
thanks mike
top details
so are we saying we can reset fault readout, by just switching off on/off. if so at which point do you activate sw.
bearing in mind the motor runs foward/reverse for 10secs, before 8E flashes up.
graham
del
just been to tool box..had bit of 4 pack cardboard from clients garage in box all the time
does this help
enr GSU3104GB/2
del
many thanks
will obtain details although I did jot down on first visit, will forward thursday
Graham
