cornflakes

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 121 total)
1 2 3 … 7 8 9
  • Author
    Posts
  • August 19, 2020 at 2:01 pm in reply to: electrolux single oven #470793
    cornflakes
    Participant

    Hi Dave
    thanks for reply..must have had wrong specs on found fan control hidden in wiring loom near selector switch so once found problem solved
    cooling fan working fine
    graham
    cornflakes

    October 18, 2019 at 10:46 am in reply to: Baumatic BD1631 dishwasher #463895
    cornflakes
    Participant

    Yes micro switch tests out ok..closed circuit when in position
    unit was working fine prior to element and pump change.. Just no heat and noisy drain pump
    only thing is machine was put on side. To remove base plate to access bottom
    seems strange fault has occurred

    October 18, 2019 at 10:39 am in reply to: Aeg b9820 #463606
    cornflakes
    Participant

    Is it a rcd trip or circuit breaker that trips

    likely fault is heating element expanding at high temperature and shorting to earth
    megger test element for leakage test..or change element

    July 31, 2018 at 11:06 am in reply to: Bosch Dishwasher #456650
    cornflakes
    Participant

    Re: Bosch Dishwasher

    sorry Dave only just got back from holiday

    unit will fill

    but evacuate water as if Flood sensor as been activated

    ther is no w
    leak or water in base of the machine

    June 26, 2018 at 12:01 pm in reply to: hotpoint BWM 129 washer #456537
    cornflakes
    Participant

    Re: hotpoint BWM 129 washer

    many thanks

    i had not scrolled down post enough to pick up model number
    senior moment no doubt

    October 15, 2016 at 8:01 am in reply to: Beko tumble dryer #441773
    cornflakes
    Participant

    Re: Beko tumble dryer

    Yes it appears so
    Does not even countdown on timed

    November 13, 2014 at 10:55 am in reply to: Whirlpool adp 8693 dishwasher #421342
    cornflakes
    Participant

    Re: Whirlpool adp 8693 dishwasher

    Without returning and stripping down again
    I failed to note resistance
    Assuming the element is ok
    What else might be the problem
    Thanks

    October 29, 2013 at 5:50 pm in reply to: Bosch d/w #403585
    cornflakes
    Participant

    Re: Bosch d/w

    Have checked micros and pressure unit all appear to be ok

    October 28, 2011 at 1:40 pm in reply to: BELLING interegated Dishwasher #362014
    cornflakes
    Participant

    Re: BELLING interegated Dishwasher

    thanks for that

    October 17, 2011 at 12:55 pm in reply to: GRILL ELEMENT #361430
    cornflakes
    Participant

    Re: GRILL ELEMENT

    many thanks for that its an emporiuim of older stuff

    April 8, 2011 at 9:47 am in reply to: LG washer #348630
    cornflakes
    Participant

    Re: LG washer

    thanks for that persume you mean a doddle are we talking hotpoint style front access

    March 29, 2011 at 3:17 pm in reply to: SMEG Dishwasher #347875
    cornflakes
    Participant

    Re: SMEG Dishwasher

    thanks..no fill at all, drain pump runs it time period and machine sit awaiting it looks like i will have to remove for further investigation, get you point about fixing screws
    will remove and test inlet valve

    March 29, 2011 at 3:13 pm in reply to: Candy single built in oven #347915
    cornflakes
    Participant

    Re: Candy single built in oven

    thanks for that, was of the same opinion its only a basic temp range stat

    March 25, 2011 at 8:48 am in reply to: hotpoint WMA34s #347873
    cornflakes
    Participant

    Re: hotpoint WMA34s

    thanks for that

    will check out pcb and door lock

    February 28, 2011 at 12:41 pm in reply to: stoves fan oven efa600h #345435
    cornflakes
    Participant

    Re: stoves fan oven efa600h

    have you checked if supply to clock is maintained when oven is on

    oven circuit controlled via clock relay circuit

    sounds like circuit supply to clock problem,

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 121 total)
1 2 3 … 7 8 9