Forum Replies Created
-
Posts
-
Re: Creda S150E W
Thanks Dave.
Seems to be a special everywhere 🙁 .
A call to Indesit looms……. 😥 😥
TCRe: Tecnik TKL9290 Throwing belt
Thanks Bryan
It has indeed a belt with green writing on it. 🙂
Be great if you could send me one. I’ll pm my details.TC
Re: Tecnik TKL9290 Throwing belt
Any ideas on part number.
Just tried Masterpart with that model and 50 belts turned up. 😯TC
Re: Belling 6060c cooling fan no go
Cheers Gents 🙂
I remember this one from the dim and distant now.
Black melted mess that cost a fortune when they decided to go with the complete plug being replaced. Loads of wires fused together,so they all had to be cut back and pieced out. Took for ever tracing back the wires with the diagram to see where they went 😥
TCRe: Lost in translation
Yep!!
Just like the alpholes who when you turn up at the door either say ‘I’ve decided not to bother’ or the best one which is common
‘I rang up and cancelled’ not to me they didn’t, I’m a sole trader 👿Re: Now AvailableTo Pre-Order
Ah 🙄
Just saw this after I’d emailed UKW admin.
Please ignore email as I’ve now found the adresses in the above post and not a lost email. 😳Trying to run two completely different businesse is making me bog eyed 😯
T C :haier:
Re: hoover hp6 130m
Just had an AAA160 doing weird stuff and that turned out to be the selector. Programme counting down but machine dead.
T C
Re: Hoover AAA160 interract
Board tried still faulty.
Changed the selector motor and lo and behold twas cured.:con:Weird one that.
T C
Re: Hoover AAA160 interract
😳 Don’t nkow if I made it clear enough from previous post.
When the programme starts to count down the machine doesn’t fill or anything. Would a motor triac cause this as well?TC
Re: Ind. WD10UK fast reverse tumble – normal?
Had a wd12 and a w123 in workshop recently on test. Both did this at exactly the same time so I presume its in the programme. The faults were unrelated (insofar as they were both Indesits).
TC
Re: Bendix 7168
Dave Conway wrote
a groove in the rubber
😯 OOs been dancing at the fetish night again then!!! 😆T C
Re: Blomberg 1515
Cheers Chris, but turns out to be just the brushes.
Drains for a few seconds, stops, drains again, beeps and flashes 600 and 1200 spin lights.Tony C
P.s. Sorry about the twicwe 😳Re: skinny jubilee clips
What width is the band on these jubilee type clips Whirlpool supply?
8mm ones can be got for around 30p each if they are narrow enough.
Would they fit in between the Whirlpool heater hose ridges?
Tony CRe: How long do you give yourself for a job in a customers h
Weeding out the ‘I want to know if it’s worth fixing’ brigade is getting
a necessary evil now if you advertise no call out charge.Tell them you do charge for estimate / diagnosis time and explain why, it soon gets shot of the liberty takers.
Genuine customers realise that a good engineer is something worth paying for!
TC
