Forum Replies Created
-
AuthorPosts
-
Criscold
ParticipantRe: Hoover HNC382T-80
PM your email
Colin
Criscold
ParticipantRe: Zanussi ZT615
Fully intergrated
Criscold
ParticipantRe: Bosch dishwasher 1 minute left
Have you checked the microswitch on the heater? I was caught out by this at christmas
Criscold
ParticipantRe: hotpoint sdw80 d/w
PM your email and can send you some info
Colin
Criscold
ParticipantRe: golocal reactive
I had a call from their 0845 phone number on Thursday last week, unfortunately I wasn’t around at the time and they didn’t leave any message. Presume they wanted to book a call, we always ask for card details or work on a pro-forma invoice before undertaking such work but these companies always refuse. I would rather loose a job than probably work for nothing.
Colin
Criscold
ParticipantRe: Hotpoint 6361 Hob Switch 50.37071 000
Hi
It looks like DST3150788242 – 50.57071.010 is listed as a replacement
Colin
Criscold
ParticipantRe: Candy CDI1012 module
Listed as 41014197
Colin
Criscold
ParticipantRe: Bearings jon Top Loading machine.
Part No.for tool 8992980018485 Listed at only £130
Colin
Criscold
ParticipantRe: Miele WT2670 Outer Door Glass
Thanks Don, Much appreciated
Colin
Criscold
ParticipantRe: Electrolux washer dryer EWX14440w ‘ e13 ‘ fault code
Overall maximum water fill time exceeded (the sum of all the water fills between one drain phase and the next, to avoid exceeding the maximum volume)- Have you checked for syphoning ?
Colin
Criscold
ParticipantRe: zanussi zbb7266 925697713/03 evaporator sensor
Comes as a kit, PM you email and will send you some info
Colin
Criscold
ParticipantRe: diplomat apm6855-1 thermal fuse
Try hyg-dip at http://www.hygenadiplomatspares.co.uk/index.html
Criscold
ParticipantRe: zwf1427w programme selector
Listed as 1320506007
Criscold
ParticipantRe: Hoover VHV380-80 Service Manual
I had a similar Hoover machine on Friday doing the same, removed and checked main board and connections refitted and test machine OK. Had a voicemail on Sunday afternoon to say was faulty again so ordered up another board, replaced board and still the same – turned out that the motor capacitor was faulty so replaced and working OK.
PM me if you want more info
Colin
Criscold
ParticipantRe: Hotpoint AQXXL129PIUK Auto – no display
Looks like disply cable – C00093726. PM if you want any more info
Colin
-
AuthorPosts
