Dales-Electronic

Forum Replies Created

Viewing 15 posts - 1,306 through 1,320 (of 1,623 total)
  • Author
    Posts
  • Dales-Electronic
    Moderator

    Re: 3 ENGINEERS LATER AND STILL NOT WORKING CAN ANYONE HELP

    What you have to realise with Beko is that they have a network of service engineers that support their brand. As you have seen they are not overly forthcoming with information. They do not offer information to those of us that are not part of this network. They have a UK spares distributor that will if available allow us to purchase manuals covering most of the range of Beko appliances. Your model however is not supported at this time. This subsequently leaves us scratching around trying to get info from where ever we can. To complicate matters, many manufacturers do not release the charts or software that allows us to diagnose the fault. I am sure that during your time as a motor engineer (if within the last few years) you will have pulled your hair out because you did not have the laptop and software to diagnose the fault. We have over 700 experienced engineers on this site, but few post to help you – I hope the above explains why. We keep on searching.

    in reply to: Gorenje #212361
    Dales-Electronic
    Moderator

    Re: gorenja

    What part do you need?

    in reply to: vented tumble dryer #211425
    Dales-Electronic
    Moderator

    Re: vented tumble dryer

    Or the new ISE machine due in shortly

    in reply to: Rough cost on a engineers visit? #212314
    Dales-Electronic
    Moderator

    Re: Rough cost on a engineers visit?

    If you let us know what the fault is then we can give you a much more realistic answer. Cheers.

    in reply to: Washing Machine – Silver #212287
    Dales-Electronic
    Moderator

    Re: Washing Machine – Silver

    Gorenje WA62121AL 2 years parts and labour at just under £300

    in reply to: Sevis M6050W Dead #212279
    Dales-Electronic
    Moderator

    Re: Sevis M6050W Dead

    Also fairly common – if you have no display lights at all usually the main pcb.

    in reply to: Hygena 8124/1 – Manual #212145
    Dales-Electronic
    Moderator

    Re: Hygena 8124/1 – Manual

    It sounds like your circulating pump is duff. Available at shop@ part no. 31X0131

    in reply to: Servis fridge freezer too cold M7684A #212054
    Dales-Electronic
    Moderator

    Re: Servis fridge freezer too cold M7684A

    According to my information this is a fridge freezer that uses a thermistor to sense the temperature (thermistor is an electronic component whose value changes with temperature) this is connected to an electronic control pcb that switches the cooling on as required. Now could you tell me what part you bought from Servis (and even better if you can indicate what part number it has) Just for your info your actual model number is – M7684A-UK.

    in reply to: servis m9503w washer dryer #212110
    Dales-Electronic
    Moderator

    Re: servis m9503w washer dryer

    Dryer fan, heater assy, dryer thermostat, blocked condensor, water injector valve, dryer pcb to get you started . More info coming your way by email.

    in reply to: Bearings? Blomberg 1501AAA #212119
    Dales-Electronic
    Moderator

    Re: Bearings? Blomberg 1501AAA

    Could be your drum bearings, perhaps drain pump or motor bearings all of which should be available from shop@ on the navigation bar to your left.

    in reply to: SamsungRS21DCNS water dispenser problem #212039
    Dales-Electronic
    Moderator

    Re: SamsungRS21DCNS water dispenser problem

    No look at the navigation bar to your left and click on repairs@

    in reply to: Servis fridge freezer too cold M7684A #212052
    Dales-Electronic
    Moderator

    Re: Servis fridge freezer too cold M7684A

    Could you let me have the serial number of this appliance as there are 5 different versions. Soon as you let me have this I can have an in depth look at it for you. Cheers – Ian.

    in reply to: Polly #212074
    Dales-Electronic
    Moderator

    Re: Polly

    Another idea, but obviously as I’m an interested party I can’t vote, how about putting Gorenje as the middle ground, I’m sure with abit of arm twisting I can get all the info we want for those that haven’t got access.

    in reply to: grip pan handle #211987
    Dales-Electronic
    Moderator

    Re: grip pan handle

    SEME part number WPAR1455

    in reply to: HPT WMA #211993
    Dales-Electronic
    Moderator

    Re: HPT WMA

    Im assuming this is what you want Part No 1603336 drum and spider assy.

Viewing 15 posts - 1,306 through 1,320 (of 1,623 total)