Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Ariston Margherita 2000 – I also have a problem!
boomish, please read the 1st line of Penguin’s reply above yours – ref the model number 😉
If you can supply that, we should be able to advise further.
Dave.
Dave_Conway
ParticipantRe: Diplomat 8702 Washer Dryer
You can’t download them online Malcolm
If you phone MFI Extracare on 0845 7959722 they will arrange for one to be sent to you.
Dave.
Dave_Conway
ParticipantRe: thermostat for electrolux BW195 dishwasher
Bear with me on this, I think I may have one.
I am trying to work out which one is which, even though one is describred as a thermostat and the other an overheat cut-out the diagram is not good shall we say 😉
Dave.
Dave_Conway
ParticipantRe: Hygena APL 8224/1 SORTED!!!
The loom is £34.95 inc VAT and delivery.
If you want one ordered and sent to you, drop me an email to spares@ukwhitegoods.co.uk and I’ll arrange from there for you.
Dave.
Dave_Conway
ParticipantRe: Asea 750 table top dishwasher
Try Capital Repairs on 020 8866 6699
Dave.
Dave_Conway
ParticipantRe: brandt
Alex wrote:That makes me wonder if some agents are on different rates?
Good point – £35 and £45 for gas we are getting. A rate increase that I asked about earlier this year that most agents got was declined as I hadn’t been on the D&G network long enough to earn one apparently 🙁
I didn’t get chance today for the call, but I will tommorow I hope 😉
Dave.
Dave_Conway
ParticipantRe: Asea 750 table top dishwasher
I’ll check further in the morning George, there’s no-one in the directories here in that area, but I may have more info at the office.
Dave.
Dave_Conway
ParticipantRe: Smeg washer dryer conversions
I’ve heard of it, we had 4 on one new site to do :eeek:
It entails changing the shock absorbers (that’s the easy bit) and the door boot which took over an hour and a half !! :haier:
Firstly, it did not work, secondly, if they insist on it being done, charge at least a double rate per appliance as they agreed to pay us this for them.
We still had to go back two weeks later and swap them all in the end for lower spin speed models 🙄
Dave.
Dave_Conway
ParticipantRe: Do white goods manufacturers keep stock?
Merloni, which includes Hotpoint – Indesit – Ariston – Cannon – Creda and a few other brands use a third party logistics company called Fixt to deliver to all the Independants, I’m not sure how they deliver to the sheds though to be honest. I believe they have localised distribution points, Don may enlighten more on this.
Dave.
Dave_Conway
ParticipantRe: hotpoint condenser drier help
The wiring diagram is only available in the service manual knobby @ circa £15 for most of them 🙁
Normally though the length of the leads is enough as the two to the right hand stat as you look from the back should be longer in theory unless the guy has cut them back.
Dave.
Dave_Conway
ParticipantRe: Homark Instruction Manual
Which model number is it Annie ?
I have some in electronic format on the tech disk we get given for a few of the models.
Dave.
Dave_Conway
ParticipantRe: Door Seal for Bernstein Cooker Required
A Nardi made one then.
R6300077 is the part number, although I don’t have one and it would probably be after Xmas by the time it arrived.
Woz may have them in stock at Expert Appliance Care (he’ll hopefully see this in the morning), failing that if you phone Caremark on 0870 7502435 as they will almost certainly have them.
Dave.
Dave_Conway
ParticipantRe: Flavel FSD A091664
Where have you tried already Philip ?
That’s that silly priced one that is actually the whole burner I think.
Connect have none, not asked Rangemaster themselves but I assume you already have ?
You could try Kitchen Economy on 029 2045 1222
Dave.
Dave_Conway
ParticipantRe: Need some phone numbers?
Frigidaire/ISDAL – 01977 665590
Hanseatic – Part of Grattan Catalogue/own brand name I think
Husqvarna – yes Lux Group
Thompson – As Brandt
Dave.
Dave_Conway
ParticipantRe: brandt
I need to speak to them anyway as I have seen a significant drop off in work recently, not just Brandt.
Also, if it’s any interest, Richard Dalley has shown a lot of interest in the Brandt thread over the last few days 😉
Dave Jones had a phone call last week from D&G asking if he would take on Admiral and Maytag work, which he declined, I had no such call from them, anyone else had this call ?
I’ll see if I can find out more.
Dave.
-
AuthorPosts
