Forum Replies Created
-
Posts
-
Re: Shop@ Boardroom Discussion
Yes agreed.
10 products per user should be more than enough, when they sell an item, another can be added etc seems fair.
It’s a shame that users can’t add their own products, but that would mean giving everyone admin rights to the shop which would not be a good idea 😉
Dave.
kwatt wrote:Okay, further to discussions tonight we look set for the weekend of the 27/28 August or the following weekend of 3/4 September,
No chance of the following weekend is there ? The 10th/11th.
My 10th wedding aniversary falls on the 22nd August and the 2 week holiday I have plannd immedietly afterwards will go over both of the two weekends suggested 😥
Dave.
Penguin45 wrote:Hopefully, someone will copy the Zanussi machine and put the spring hangers on the front half of the tub, and the bolts through from the back! Obvious really
Ask Ken about the reason why Zanussi bolts are facing forward, he did tell me once, it’s to do with production costs, but I can’t remember the exact figures/reasons now 😕
Dave.
Re: 3+ Day Head Start
No, that seems fair enough to me.
As we said at the meeting, those that put in will be those that get back 🙂
Dave.
kwatt wrote:Sean has Dave spoken to you yet about this?
No, I haven’t yet TBH, I was rather tied up this weekend with something 🙁
Anyway Sean, the email address to contact the hotel about meetings is:
sales.hatfield@ramadajarvis.co.uk
Telephone number 01707 265 411
There’s also a floor plan document available for download here:
http://www.ramadajarvis.co.uk/pdf/HatfieldFloorplan.pdf
Dave.
Re: Hoover AC120 spinning constantly
Armatures normally but it’s pretty obvious when they go, raised segment is the normal one, or a dead short across it.
Dave.
Re: Hoover AC120 spinning constantly
PITA these Candy clones, motors are failing at an alarming rate and taking out the timers.
But if the motor appears to be Ok, then maybe the flash was caused by spillage on to the motor or pump from the drum spinning full of water ?
Dave.
Re: Diplomat Dishwasher ADP8224 Programmer fault
That is almost certainly the control PCB a fault.
They are £152.15 inc VAT from MFI. Plus about £5 postage.
I don’t think this particular PCB can be repaired sadly 🙁
If you need one, let me know, I can order one for you.
Dave.
Re: Late or what !
streetlighter wrote:Because i can get £110 for doing them myself
Bit of a dilemna this one isn’t it ?
If the customer is unaware of their parts warranty from a manufacturer, do you tell them or just carry on with the job and charge them accordingly ?
Dave.
Re: broadband wireless routers
Machineman, which operating system are you using ?
Before you install anything I would seriously consider upgrading all of the pc’s to be connected to Windows XP Pro. Earlier systems are a PITA to configure, XP Pro generally “just works” as it has all the latest drivers installed.
Dave.
Re: Smeg dw1 710 e1 Dishwasher
Not a git, a magician 😀
Now can you make my credit card bill disappear please 😆
Glad you got it sorted.
Dave.
Re: Smeg dw1 710 e1 Dishwasher
Wizard,
According to Smeg’s fault code list, two lights on the left on all the time and the one on the right flashing means no heat.
I would imagine that when the motor cap failed no water circulation has caused an overheat thermostat to trip.
HTH
Dave.
Re: Hygena Integrated Dishwasher APL 8224 – Leak!
A classic with these is a damaged or blocked lower spray arm. Check for blockages in it first, otherwise it may well be split along one of the seems.
Water being directed in one direction constantly is the reason for the leak.
Hopefully it’s just that anyway.
Dave.
