DDDave

Forum Replies Created

Viewing 15 posts - 121 through 135 (of 212 total)
1 2 3 … 8 9 10 … 13 14 15
  • Author
    Posts
  • November 17, 2010 at 11:21 pm in reply to: Miele G 679 Dishwasher #335932
    DDDave
    Participant

    Any help please ??

    November 16, 2010 at 5:05 pm in reply to: Miele G 679 Dishwasher #335931
    DDDave
    Participant

    Still got a problem. I did as Seamy said , turned it on and all lights flash again. I tried resetting again and now lights 1,4 and 5 stay on and 2 and salt flash. Any ideas please.

    November 16, 2010 at 8:43 am in reply to: Scary EOB built in oven moment! #336005
    DDDave
    Participant

    Re: Scary EOB built in oven moment!

    November 15, 2010 at 11:14 pm in reply to: Miele G 679 Dishwasher #335930
    DDDave
    Participant

    Thats what I need.

    Many thanks Seamy, I will go back tomorrow and let you know.

    November 15, 2010 at 1:21 pm in reply to: Tricity Bendix BIW103w #335902
    DDDave
    Participant

    They may have shoved the outlet hose too far down into the standpipe causing syphoning.

    November 15, 2010 at 9:26 am in reply to: Zanussi ZWD 1472S #335534
    DDDave
    Participant

    Thanks Tubs

    Thanks for the PM Seamy

    November 12, 2010 at 4:28 pm in reply to: Bosch SMS3042 Dishwasher capacitor #335586
    DDDave
    Participant

    The customer came in to ask for the capacitor so I will tell him to have a look to see if its printed on the motor. Thanks for the help guys.

    November 12, 2010 at 4:25 pm in reply to: BEKO DW450 #335743
    DDDave
    Participant

    I tested it by flicking a strong magnet beside the sensor and tricked the machine into thinking it was filling !!

    November 12, 2010 at 1:39 pm in reply to: BEKO DW450 #335741
    DDDave
    Participant

    There is a flow sensor in the side of the machine that meters the inlet water. These give trouble.

    November 12, 2010 at 8:43 am in reply to: Zanussi W1242W #335658
    DDDave
    Participant

    Possably the pump overheating and cutting out when it has been on for a while.

    November 12, 2010 at 8:41 am in reply to: Hotpoint WD420 #335630
    DDDave
    Participant

    Could someone have been at it before and put the wrong fan or motor into it – turning the wrong direction ? Also on some of the HPs there is a grill at the base of the condenser tube where it connects to the drum, could this be blocked ?

    November 12, 2010 at 8:33 am in reply to: Bosch SMS3042 Dishwasher capacitor #335583
    DDDave
    Participant

    Its the motor capacitor I need. Bosch gave the customer that part number.

    November 11, 2010 at 2:29 pm in reply to: Bosch SMS3042 Dishwasher capacitor #335581
    DDDave
    Participant

    Sorry Martin. I thought I had put it up. Its a SMS3042 FD7004025639

    November 11, 2010 at 8:45 am in reply to: A little bit rusty #335029
    DDDave
    Participant

    Have you checked the carbon brushes ??

    October 22, 2010 at 6:52 pm in reply to: washing up liquid in GDA dishwasher #333678
    DDDave
    Participant

    Re: washing up liquid in GDA dishwasher

    jag-12 wrote:I find if you put milk in the machine it kills the foam. No idea why but it works.
    .

    Milk has a high fat content. Washing up liquid disolves fat / grease and is used up doing so.

  • Author
    Posts
Viewing 15 posts - 121 through 135 (of 212 total)
1 2 3 … 8 9 10 … 13 14 15