don

Forum Replies Created

Viewing 15 posts - 2,041 through 2,055 (of 8,041 total)
  • Author
    Posts
  • in reply to: Zanussi ZDV12001FA wont open compartment with tablet in? #433529
    don
    Moderator

    Re: Zanussi ZDV12001FA wont open compartment with tablet in?

    Hi

    I wouldn’t go trying to fix it yourself as you may invalidate your guarantee, instead phone Service Force on 0330 333 3725 who will arrange to send an engineer out. Have the model and serial number to hand when you phone.


    HTH 🙂

    Don

    in reply to: Beko DRCS68S drier front fan blade. #433503
    don
    Moderator

    Re: Beko DRCS68S drier front fan blade.

    Hi Steve

    Googling comes up with this in Poland, cost about a tenner.


    Don

    in reply to: PTC Relay 8EA17C3 #433379
    don
    Moderator

    Re: PTC Relay 8EA17C3

    Hi

    Dave in the shop should be able to get that for you. Hit the green spares tab request form on the right of this page.


    HTH 🙂


    Don

    in reply to: Can I get a Non Sealed Tub Washing Machine Sub £500? #433339
    don
    Moderator

    Re: Can I get a Non Sealed Tub Washing Machine Sub £500?

    Hi

    If it’s a Bosch you are after then the WAE24167 has a split drum. You will need to act fast as there are not many left.


    Cracking price as well.


    Don

    in reply to: Alternative for aeg 5212bu main oven stat #433367
    don
    Moderator

    Re: Alternative for aeg 5212bu main oven stat

    Hi Gandh1

    Long time no speak 😀

    Found this link who are saying they have it in stock. May be worth ringing them to check though.


    Don

    in reply to: Bosch instructions #433279
    don
    Moderator

    Re: Bosch instructions

    Hi

    I have looked everywhere and like you cannot find an English version. Give Bosch a shout from this link they should be able to source for you at a price.


    Don

    in reply to: Dishwasher depth 550mm #433276
    don
    Moderator

    Re: Dishwasher depth 550mm

    Hi

    The only dishwashers with a depth of 550 are the integrated ones. I have not come across a freestanding one at that depth before.


    Don

    in reply to: Hoover door seal #433277
    don
    Moderator

    Re: Hoover door seal

    Hi Jim

    Found it by shortening the model search to DYN9164, your model ends with GB/1-8 Listing attached.


    Don

    in reply to: Bosch WKD28350GB/03 #433237
    don
    Moderator

    Re: Bosch WKD28350GB/03

    Thanks for info Martin I’ll pass it on 😀


    Don

    in reply to: Whirlpool to do a recall on Hotpoint dryers #431170
    don
    Moderator

    Re: Whirlpool to do a recall on Hotpoint dryers

    Hotpoint dryer recall 😀


    Don

    in reply to: Miele W842 #433212
    don
    Moderator

    Re: Miele W842

    Hi Merv


    No. 7 or 9?


    Don

    in reply to: Value condenser dryer #433127
    don
    Moderator

    Re: Value condenser dryer

    Hi

    I would go for either the Beko or White Knight condensers in light of the recall on Hotpoint and Indesit dryers http://safety.hotpoint.eu/. In time existing dealer stock will be modified or replaced as decided by the retailer. Good stock of dryers should have a green sticker on the rear alongside the model details label.


    If you have provision to vent I would go for a vented model any
    day, again the White Knight is always a good bet.

    HTH 🙂


    Don

    in reply to: Whirlpool to do a recall on Hotpoint dryers #431128
    don
    Moderator

    Re: Whirlpool to do a recall on Hotpoint dryers

    It’s certainly surfacing now http://safety.hotpoint.eu/ complete with model and serial number checker. TS have also been given or lifted the same info as it appears on their site here as well.


    I’d like to know where the “extra” guys are coming from to cover all these machines?


    Is it worth a “sticky” at the top of the TD forum or as a news article on the front page?

    Don

    in reply to: Whirlpool to do a recall on Hotpoint dryers #431125
    don
    Moderator

    Re: Whirlpool to do a recall on Hotpoint dryers

    Article just popped up on my news feed from the Bournemouth Echo
    Hotpoint / Creda recall.


    Now also reported on the Business and Markets news sections on BBC Teletext.


    Don

    in reply to: help picking low budget machine #432906
    don
    Moderator

    Re: help picking low budget machine

    That’s the 6kg 1200 spin, still a good buy with the two year warranty.

    Don

Viewing 15 posts - 2,041 through 2,055 (of 8,041 total)