[don]

Re: Vented dried in garage?

Morning K 😀

[don]

Re: Vented dried in garage?

Hi

If your condenser dryer is a sensor dryer that’s probably the reason for it not working correctly as they need an ambient temperature in order to operate. If you bring it into the house it will work normally.

If you wish to change it then yes I would go with a vented dryer with a mechanical timer like the White Knight WK44AW.

HTH 🙂

Don

[don]

Re: toshiba microwave bulb

In that case it is probably an E17 thread size which fits with your 16.5mm measurement. Could it be one of then ? Hope it is 🙂 I have to say I have not come across that size before!!

Don

[don]

Re: toshiba microwave bulb

Hi

Sounds like you need a SES threaded golfball they come in 25w, 40w or 60w.

Bosch use 40w SES golf rated at 300 degrees which is probably a better bet. in a microwave

Don

Moved to Trade spares 😉

[don]

Re: toshiba microwave bulb

Hi Cliff

Can’t find anything on this now, is the lamp golf ball shape and is the thread about half inch across or an inch across?

Don

[don]

Re: Non welded tubs in new washing machines

Hi

This topic was nicely covered in this thread recently.

Don

[don]

Re: Cheap (sorry) washing machine needed

The 1400 spin version is variable so can be reduced if required. 1600 spin machines do not look after fabrics, yes it will be marginally drier but will have more creases so ironing is harder.

Don

[don]

Re: E/lux Eob5700x oven toc

Hi

If it’s position 3B on attached picture then Distriparts say original part no 3570436034 in stock at Distriparts . Connect says it goes to 3570560072.

Don

[don]

Re: Cheap (sorry) washing machine needed

timdowning wrote:Give it no more thought.

My thoughts exactly 😆

Bosch all the way 😀 WAE24377 as mentioned before or the WAE24167 or even the WAE28167.

Job done and all in before Christmas 😀

Don

[don]

Re: Indisit washer on its way out

Hi

Not a lot left after you take out the big players. Your LG deal is a good deal especially with the five year warranty.

There is a Miele here if you can stretch a little which will be more durable when washing four loads some days. Good quality machines which are built to last but Miele service is restricted and the parts can be more costly than the average.

Don

[don]

Re: Can I get a Non Sealed Tub Washing Machine Sub £500?

I would start at the bottom and work up, check the floor level first, left to right and front to back. That will tell you what needs adjusting.

it’s highly unlikely the machine bottom is out of true as the production order is pallet first, then the base panel gets bolted to it and the machine gets built up from there.

Don

[don]

Re: Fresh Paint

Thanks Ken for the info.

I’m running an older square screen at work Jim 😉 Widescreen at home so that should be okay 😀

Don

[don]

Re: Fresh Paint

All looks good 🙂

Just a couple of things I’m getting an error message when posting pictures

Also have to reduce screen zoom back to 75{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} otherwise adverts overlay the main menu down the right side. 75{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} is no good for my old eyes 😆

Don

[don]

Re: Can I get a Non Sealed Tub Washing Machine Sub £500?

Hi

It just goes to show it’s a good bit of solid kit it is 😉

Adjusting the feet is very easy it’s page 54 of the instruction book.

Don

[don]

Re: I think I need a replacement element for SMEG oven

Hi

If the fan is running then sounds about right. The only way to be sure is to remove the element having first turned off the power :zap: and have it tested.

You can order a replacement by hitting on the green tab over on the right of this page 😉

HTH 🙂

Don

[Author]

Posts