don

Forum Replies Created

Viewing 15 posts - 2,476 through 2,490 (of 8,041 total)
  • Author
    Posts
  • in reply to: Gorenje WA61111 #420501
    don
    Moderator

    Re: Gorenje WA61111

    Hi

    I can, but I do need the ART number as there are four versions of that model number :rolls:


    Don

    in reply to: Hotpoint wd door part number info required #420419
    don
    Moderator

    Re: Hotpoint wd door part number info required

    Hi John


    Door shield C00115528


    Door parts on Partfinder is an explosion with no part no. for a complete door I’m afraid.


    Don

    in reply to: Noisy Indesit WIXL143 on final spin #420351
    don
    Moderator

    Re: Noisy Indesit WIXL143 on final spin

    Hi

    If you remove the belt and spin the drum by hand and the noise is still there then the bearings are going. This machine has the dreaded Inde***t sealed tub and would not be a cost effective repair.

    If it were me I would go out and buy a new machine but not an Indesit or Hotpoint :rolls:

    Bosch are well worth a look 😉


    Don

    in reply to: Red light on #420349
    don
    Moderator

    Re: Red light on

    Hi

    It does sound like you have an internal gas leak and what you can hear is the remainder of the gas running around the system. Which is why only part of the pipework is getting cold.

    Of course only an engineers visit can confirm this. Have you tried our find an engineer function


    HTH 🙂


    Don

    in reply to: Hotpoint Aquarius WML540 washing machine banging on spin #420356
    don
    Moderator

    Re: Hotpoint Aquarius WML540 washing machine banging on spin

    Hi

    It does sound like it’s bearing failure, have you taken the belt off and spun the drum by hand? if it runs silent then the bearings are probably okay and the problem lies elsewhere.

    If the the bearings have failed and your machine is under five years old Hotpoint will cover the whole repair for £110. If it’s over five years old it will probably be cheaper to replace rather repair.


    Having had a quick look at the drawings there are quite a few versions of your machine, the random choice I took indicates your machine has the Inde***t sealed tub syndrome :rolls:


    HTH 🙂


    Don

    in reply to: Cold fill only on Hotpoint WMA56 #420353
    don
    Moderator

    Re: Cold fill only on Hotpoint WMA56

    Hi

    Both hot and cold need to be connected for the machine to function correctly.


    Simple solution is to fit a Y piece. There are cheap plastic ones around but I prefer to use a brass one more expensive but much more durable.


    HTH 😀


    Don

    in reply to: Red light on #420347
    don
    Moderator

    Re: Red light on

    Hi

    A model number would be nice 😉


    Don

    in reply to: 680uf 10v capacitors #420264
    don
    Moderator

    Re: 680uf 10v capacitors

    Hi Jim

    Will these do 🙂


    Don

    in reply to: Scandinova cooker Model DF902 #420214
    don
    Moderator

    Re: Scandinova cooker Model DF902

    Hi Merv

    Could it be one of these ?


    Don

    in reply to: Montpellier Cooker Hood #420135
    don
    Moderator

    Re: Montpellier Cooker Hood

    Hi

    Don’t go trying to repair it yourself as you could invalidate the guarantee. Return it to the retailer for repair / exchange.


    Don

    in reply to: Football Season 2014/2015 #417462
    don
    Moderator

    Re: Football Season 2014/2015

    Time to start another run after a 1-0 reverse yesterday at WHL. Could have had a draw if we hadn’t missed the sitter.

    At least the two managers were very civil to one another unlike the pair of two year olds having a spat at the Bridge 😈


    Don

    in reply to: Currys C100WM10 Door Seal #420026
    don
    Moderator

    Re: Currys C100WM10 Door Seal

    Hi Allan

    Part no. MDI302700300056 in stock at Connect.

    Don

    in reply to: Baumatic Washer Dryer BWD149W Where Can I Get Parts? #419978
    don
    Moderator

    Re: Baumatic Washer Dryer BWD149W Where Can I Get Parts?

    Hi

    Complete door BMT07021855 you don’t want to know the price :eeek: hinge BMT07021873 not to bad. No stock at Connect or Qualtex.


    Hoover Candy group have now taken on the spares 08443 712 758


    Don

    in reply to: Neff oven removal #419752
    don
    Moderator

    Re: Neff oven removal

    Hi

    I don’t know where you live but have you tried our find an engineer option ?

    Don

    in reply to: Samsung WF80F5E0W4W sump hose #419875
    don
    Moderator

    Re: Samsung WF80F5E0W4W sump hose

    Hi

    Moderator r600a aka Bryan is the Samsung expert. But at this time of day he will still be out on his own calls, but will more than likely check in later.


    I did have a look myself but I could not access Samsung spares via Connect distribution log in and also Google search didn’t throw anything up.


    Probably best to check back in this evening when more are online.


    Don

Viewing 15 posts - 2,476 through 2,490 (of 8,041 total)