Forum Replies Created
-
Posts
-
Physical size wise all integrated overall sizes are the same, it’s the door splits and hinging which are different.
I can confirm you have a 70/30 split appliance. It’s the hinging issue, by the looks of it your current appliance is what we call fixed hinge, can you confirm that the hinges are like a canti lever please. Better still take a photo host it somewhere like Google pics and paste the link on here.
The model you have picked out has the more popular sliding hinge arrangement, sadly the two different types are not interchangeable.
Don
Looking at the explosion there does not appear to be any other screws apart from the three at the rear. Have you tried lifting the rear of the lid and sliding / wiggling it?
Don
Model number would be handy.
If there are no side screws then the worktop lids usually have to be either wiggled from the rear or a sharp tap from the front.
Don
Sorry but like Dave I get this message on opening ,
“We are sorry, but you do not have access to Google Photos. Please contact your organisation administrator for access.
Sign in with a different account
[/HR]Billing terms – Privacy policy – Google Home
© 2023 Google LLC.”As for your query:
I have known engineers remove the labels if the item is unrepairable and therefore scrap. This may be the case in question.
Don
Sorry but I cannot open that link.
Have you recently purchased this appliance your reciept should show the model number. I have known some graded products have the info removed?
Don
Sounds like you have a compact appliance which will be multi function. The all important ENR and FD number is usually found on the bottom left of the cavity when the door is opened. It is also on the rear usually in the middle towards the base, it will consist of the barcode as well.
You can post picture links which have been hosted on other sites like Google pics etc. A picture link to the fascia could be helpful.
Don
Waste pipe should not go any further than four inches down waste pipe otherwise the machine will not pump out correctly. I would investigate the pipe your waste hose goes into also the sink trap! Smells do have a habit of fooling you.
Is there a dishwasher alongside? If so investigate that as well.
Don
Have you checked the filter at bottom left? is the door seal clean in the bottom lip? Have you checked the waste hose where it joins your plumbing? Sink trap check?
All the above can give the symptoms you are describing. There is a raft of info here on smelly washing machine issues.
Don
If you are wanting stainless steel again then take a look at this lot on AO.
I am a great admirer of Bosch and Siemens, but Whirlpool, Beko and AEG are all worth considering.
Don
As for a replacement The Beko you link to has been discontinued for quite some time, even Google can’t find any.
The narrowest dryer I can find which is 540mm in depth is the Beko heat pump model DTIKP71131 which in fact is an integrated appliance heat pump dryer. The water container is at the top for easy emptying but the condenser which will need regular cleaning would be behind the kick plinth.
The only other option would be to re site a standard 600mm machine.
Don
electrofix wrote:try holding the bottom right button for a few secs then see if the up and down arrows work
Dave
Just what I was thinking 😀
Don
A picture would help, you can upload a photo to one of the many hosting sites and then paste it here. The model number of the unit would be very helpful as well.
I think I know how to adjust but I just want to make sure 😀
Don
Montpellier is a brand sold by independant retailers, it’s a budget brand but comes with a two year guarantee. Most retailers who sell these are able in most cases able to repair as well.
First off I would try a total defrost for three days with appliance switched off and doors left open, if it has a fan in the freezer this will allow any ice build up to defrost. If this doesn’t work see if it is still under guarantee. If so ring customer service on 03333 234 473.
Don
