Forum Replies Created
-
Posts
-
Re: Which 1600rpm 8kg washer? Siemens, Panasonic or… ?
Hi
The Bosch machines with the half moon shaped door handle are normally built in Bosch factories around the EU. The WAA series with the small square door handle and lower spec are normally made in Spain.
A very similar thread to this one only last week where the OP had very similar criteria here ended up with a good result.
HTH 🙂
Don
Re: Neff T/D R4381X1GB/01
gandh1 wrote:proper expensive, parts prices are silly, but bosch also know you cnat buy a new integrated condenser any more 🙂
gandh1 wrote:
my point is fix it at all cost because suggesting a write off is not what het customer will want to hear when a b/i condenser is not available on the market any more.True Bosch / Neff don`t 😉 but Miele do, so long as you don`t mind parting with at least £900.
Don
italianwasher wrote:The Reason Washing Machine is very much alive and we got involved with it after your site discussed it. Thanks it is as they promised.
The original patent is granted!
I would be interested to know who the “we” is or is this just more “spin” to keep the topic alive?Don
Re: Recommendations to replace ageing Diplomat adp3101 oven
Hi
The instruction manual can still be obtained from hygena Diplomat spares and it`s not too expensive either.
If the worktop is 60cm deep then any single oven will fit, Indesit group tend to be 569mm to front of door, Bosch Neff group 571mm.
The only time there may be a problem is if a gas hob is fitted directly above and the pipework is protruding too far forward.
HTH 🙂
Don
Re: Warranty Direct
Hi
Don`t know if this helps or not, after a little digging I have found some numbers through Say no to 0870 by typing the company name into the search option.
Also found what I think is their website here although I don`t know if it will help :rolls:
HTH
Don
Re: New Washing Machine – John Lewis vouchers to burn!
Great stuff thanks for the update 😀 hope the Siemens gives you many years of good service.
Don
Re: Require some help with Air con unit
Hi
If it`s a portable unit someone may be able to help.
Can you supply us with the make and model please.
Don
Re: Torn between Liebherr, Siemens and Panasonic
kunid wrote:
If you were to pick from these three which would you go for?Your list is spot on 😉 Liebherr definately first choice.
Don
Re: Shower
Hi Beats
Sorry but I doubt very much you will get many if any answers to this one.
There is Shower Doctor which has forums for questions, help and spare parts on showers. Don`t forget to post model and serial number 😉
HTH 🙂
Don
Re: ice king fridges
Hi Chris
Ice King is an exclusive brand produced in Scandinvia for DAD @ Gloucester We have been stocking most of the products for the last couple of years with very few problems.
Some of the products are swap out under guarantee the rest are covered by Service Force IIRC.
Very good value for money products 😀
HTH 🙂
Don
Re: raw machines in fareham hants
Hi Paul
If you type raw AND appliances into the search function there are a few threads that may help.
Don
Re: elux ehp600k pnc 949590604 ceramhob terminal box
gandh1 wrote:
i dont suppose u might have an distripart no. as im putting a direct order thru for 2x drum ass tomo and might be able to wrangle a better price out of them than what connect can get for it 🙂
Connect converts it to part no. 4003559996. Pro Corner confirms it`s for a mains terminal 😉Don
