Forum Replies Created
-
Posts
-
Re: SMEG dishwasher problem
Could be something as simple as blocked spray arms, You need to remove them to do this properly. Read the “diswasher not cleaning properly” thread near the top of this forum.
Re: Drain Hose and fill hose extension kits
In the days i had a shop, that was the most frequently asked question. And one we could never answer as the customer never knew what the end of their existing drain hose was like or what it was going to fit on at the other (drain) end. i used to try a get a call out of it to fit a complete new one, often not an easy job these days.
Bosch used to do one to fit their drain hose that had a flat section, rather than the corrugations, every 10 cm or so that allowed a fubber sleeve to tighten down onto without leaking.
As for the ones with just a cut off corrugated hose there is nothing that will ever do the job properly.Re: stickers
Why not make your own on Avery inkjet stickers and that way you can stick your phone number on there as well, or get (kall Kwick or the like to print them).
Re: maytag neptune
stu123 wrote:anyone had any experence with this beauty got suckered into fixing 2 of them on the promise that if the repair was more than 50.00 they would buy new only to then be told they would like them repaired so 1 one no prob broken wire 2nd one no motor action have swapped modules and motor no faults there tried calling maytag for a service manual christ youd have thought i asked for the crown jewels 😆 so any thoughts apreceated 💡
£50! 😯 do they know how much these cost? I wouldnt even think of attending one of those for £50 yet alone fixing it.
Re: Set fee service calls ?
Hotpoints Website wrote:Home visit, including a free estimate and diagnosis – £34.99
so, by free estimate they actualy mean £34.99?
Re: Set fee service calls ?
I had a smeg made, hotpoint washer dryer the other day that Hotperloni had visited and said it needed a motor and programme module. They quoted £180 max inc parts and lab yet the hotpoint price for just the module is more than that. They quoted 3 weeks to get the parts though but i had a module in stock and did it on the spot for about the same amount all in, nothing wrong with the motor needless to say.
Re: Hygena APL 8214/4 Water not filling up
It will be bunged up with gunk on the meetering unit, its in the left hand side panel, (when viewed from the front). Dont attempt anything without unplugging first. and dont try to use it as it will burn the heater out…..if it hasn’t already.
Not an easy machine to work on, try our repairs @service to find an engineer.Re: CLENAWARE
No, but just read up on them at http://www.clenaware.com
Re: UK Whitegoods Meeting 5
deffo worth the trip Bazza, but not the way you planned it. I would recommend arriving Thursday to anyone 150+ miles away, as the meeting usually starts 10 ish. Hey, give yourself a break, maybe if just for that reason its worth it.
Re: Dynamic Forms
Ken, despite 2 pop up messages saying it needs a updated version of acrobat (I have 5) for it to work, it does seem to work but I have not tried to submit it, should I try a fictional version?
Re: Dishwashers
As for the AEG, pull the machine out of its housing and check any wiring behind the machine, I have had a Hob cable insulation wear through over the years as the diswasher rubs against it hence just movement of the door could trip it out. Stranger things have happened, usually to me.
Re: Brand New Miele W2240 Washer
can only suggest opening the door (using the emergency release in the filter housing) and closing it again. Is it simply plugged in or hard wired? check the socket or the wiring whichever applies. only other thing to do is call the Miele service number.
Re: New twin tub
Haven’t seen one of these in the flesh as yet, but what I have noticed about the picture is:a) it seems to have feet rather than rollers, you know how the old ladies with twin tubbs like to roll them into some specially made cupboard, well with this they may be dissapointed.
b) the picture supplied by portway (and the one Don has linked to above)shows the drain hose on the side of the machine. This is of the type used in Japan and elswhere that empties into a drain under the machine via a dump valve, if they think this is going to empty into a sink they will again be dissapointed.If anyone has seen one of these (there seems to be several all of a sudden) please check this out for me.
