Forum Replies Created
-
Posts
-
Re: Isis DW250 dishwasher – any idea who made it?
Deffo Vestel.
Identical to Statesman BFD60-12 (installed one last week)
Parts reasonable. 🙂Steve
PS Whats wrong with it?
Re: olympics 2012
Nice job there Garn and like the van.
Not wishing to cause alarm but your house seems to be falling over.Steve 😆
Re: Bacon and Egg disappointment
On a similar note may I heartily NOT recommend the bacon sandwich from Burger King.
An insult to the pig.
Steve
Re: Letting agency deducting 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}
Letting agent I do work for adds a handling charge to my invoice before deducting from the client account.
I suspect that your letting agent is doing the same and getting a double whammy.
Mind you with the cost of Champagne being what it is you can hardly blame them 👿Steve
Re: Whirlpool D/W no float switch?
When they started using the Askoll wash pump with the electrical connection on the bottom they didn’t need flood protection.
When the water level reaches the pump it blows the module and prevents flood.Simples 😆
Steve
Re: Whirpool 3XLER5435HQ Wiring diagram
There should be a wiring diagram tucked in behind the control panel.
Steve
Re: Red Stains on Clothing ?
squadman wrote:
While dismantled, Tub Washed out, new bearings and seals fitted, however the tub still had an odour to it.
Any other thoughts on this ? 😕
I would question which programmes the customer habitually uses and type and quantity of detergent used as the tub should not smell.
Tub hoses could be breaking down and releasing the black stuff but I would think that would have been evident before the bearing change.I had a similar problem with laundry staining and asked the customer why she was putting a £500 wash load in a £200 Beko washing machine.
Customer now has an ISE machine and the Beko is washing horse riding kit at my daughters house.
Steve
Re: whirlpool door seal
You can buy the whole machine for about £620 retail on t’internet 😯
Steve
Re: Whirlpool 3RLER5437JQ Tumble Dryer
Take out the filter then remove the filter manifold (4 screws) and its there.
Unless you mean the one shot safety stat on the heater box which is best done with the heater assembly removed.
Take off all the wires one securing screw at the front and pull.Steve
Re: whirlpool washing machine
MrGoodlegs wrote: 5mm was too small and 6mm was too big
You need a 5.5mm nut driver or box key.
You also may need to reduce the external diameter of the tool with a grinder to get it into the recesses.Steve
Re: DWF415 whirlpool made for ikea
Try cleaning the edge connector contacts on the board and squeeze the plug a bit to improve the connection.
If that doesn’t work you can change the reed switch.
Not tried that myself but seen it mentioned in the forums.Steve
Re: Spare parts for sale
bazza500 wrote:Dave, at 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} off retail you haven’t got a hope to be honest. Most trade members on here will be getting much more than that.
I think he said 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of retail which is 80{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} off by my calculator :lesson:
Steve
