[ELDAR59]

Re: gorenje wa61111

pump to dispenser?

do you mean soap dispenser hose or sump hose?
the part numbers really do depend on the art number.

for art no 133378/00 the sump hose is 587436 before serial number 52930001 and 132733 after.
the dispenser hose is 587386.
for all other art nos, the parts are:-
sump hose 132733
dispenser hose 178028

hope this helps.

cheers.

[ELDAR59]

Re: CDA dishwasher CW447

thanks again mate! 🙂

[ELDAR59]

Re: CDA dishwasher CW447

hello franz, i don’t suppose you have the part no for the heater for the same dishwasher do you?

cheers.

[ELDAR59]

Re: AMANA AC2224GEKB

hi johnny, the condenser fan should run with the compressor. if they’re both not working or working erratically then the pcb is your problem.

[ELDAR59]

Re: Admiral/Maytag GC2227SDFB American fridge freezer

sounds like you’ve got a tricky one there dave, but it also sounds like you’ve covered most things.
the wiring isn’t accessible though. it could just be a case of cutting them until you get a good reading and then running another wire in its place.
there is a wiring diagram taped to the underside of the fridge section on many maytags, not sure if this model is one of them.
good luck mate, sorry i cant be any more use to you.

cheers.

[ELDAR59]

Re: Admiral/Maytag GC2227SDFB American fridge freezer

the most common cause of earth leakage on this fridge is the defrost heater followed by compressor.
i don’t want to sound patronising here, but are you certain that these two things are ok?
other than that and if all the other components are good, then you could have a wiring fault. it depends how long you want to spend on the thing really, checking all the wires etc.

cheers.

[ELDAR59]

Re: CDA dishwasher CW447

thank you.

[ELDAR59]

Re: AEG induction hob glass top

thanks again john. it’s still a fair old chunk though. i’ll see what the trade price is tomorrow.

cheers.

[ELDAR59]

Re: AEG induction hob glass top

thanks for that john. do you have a rough idea of price?

cheers.

[ELDAR59]

Re: beko d/w part

thats the one bob, thanks mate.

[ELDAR59]

Re: Liebherr freezing in fridge freezer ok

hi mate, what tech info do you need?
it’s 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain that the problem is the fridge evap sensor.
part no: 9590142, located behind plastic cover on back wall.

cheers.

[ELDAR59]

Re: liebherr f2 error code

the sensor you’re replacing will be the one that is attached to the evaporator plate.
it will more than likely be at the rear of the evaporator, inside the cabinet.
you’ll need to take it from its housing and pull it through the cabinet from the back.
then you join as per instructions.

cheers

[ELDAR59]

Re: beko d/w part

thanks geoff!

[ELDAR59]

Re: dedietrich timer

thanks ken, dumb display is what i want!

cheers.

[ELDAR59]

Re: fisher paykel element

thanks john, i’ve just typed that into the search box on connect and i don’t think it’s the same element.
the neck on the one on the appliance is long and thin. the one above is much wider.
thanks again for your help.

cheers.

[Author]

Posts