Forum Replies Created
-
Posts
-
Re: TDWSF83BEP Door Filter Light
not only wasteful but if you count the CO2 in having to remake the appliance and the CO2 of recycling the unit its should be a crime
Dave
Re: Beko ECOWMB81445LW
water is counted in by a similar system to bosch dishwashers and it may be cutting out due to that or no motor turn
have sent you some light reading that may help
Dave
Re: Neff S51M63X1GB constantly cutting out
switch seems to be at the top of the door
go here
http://www.neff.co.uk/store/spare-partsput your complete Enr in ( yours has the 2 end numbers missing )
parts diag 2 item 0245
door switch once disconnected can be checked by a muti-meter on low ohms scale
Dave
Re: Zanussi ZWD1262S part fills then drains and ends.
have pm’ed you one of the tech manuals
put it into diagnostic mode and see if there are any fault codes etc
Dave
Re: Neff W/M lights flash
since Neff and bosch are similar try the bosch reset
knob to 6 o clock
push and hold spin speed button
turn knob 1 click clockwise
release spin buttonyou may have to do a couple of times as it does not always work first time
its worth a try, think its applicable, unless someone knows different
Dave
Re: Neff S51M63X1GB constantly cutting out
moulded plug I was talking about just making sure you had covered all the loose connection bases
as you can imagine I don’t know everything but as far as I know there is no sensor that will cause this. From what you say you are losing all power unless you turn it off and back on. assume you mean turn it off at the socket and the power button is also inoperative.
somewhere on the board at the back is a power supply that converts mains voltage down to about 12 that the electronics need. It my guess this is not working properlyyou can post pictures and I will see what I can spot as I have as yet not had one of these boards out
Dave
Re: Neff S51M63X1GB constantly cutting out
also assume you have checked the mains plug on the back of the dishwasher.
if this is ok sounds like you may have power supply issues on the main rear board
not had one of these boards out to look at so don’t know the board layout. complete new board is about £110
Dave
Re: Bosch Wis28440GB/40 Fd 9311
your description is a bit vague.
your saying the machine will start and complete a programme but when it ends the time has reverted to the start time
cant see the fault as I cant see why this would matter
Dave
Re: Neff S51M63X1GB constantly cutting out
take it you have tried another socket to eliminate that
Dave
Re: Electrolux washing machine
site shop should have them but first you need to determine if its your problem
brushes are at the rear of the motor. tilt machine backwards. tap the brush holders firmly with a screwdriver. then pull machine straight and try it. if it turns its your brushes and they need changing. if it does not turn its either 1 still your brushes and you will have to check them manually or 2 another problem
Dave
Re: Electrolux washing machine
just to make life difficult there are 13 machine with the same model ( but different production codes ) so I picked a 2015 model
although its unlikely I would check the motor brushes. most of the time these will last 5 years plus unless the machine has had very heavy usage
Dave
Re: fitting problem
iadom wrote:
vitreous enamel 40 odd years ago on mine. 😀
Now who,s showing their age lolDave
Re: Coop Bank failure
Even short term the receivers would step in and keep the business going and then find another bank to take the accounts over. All customer accounts and money cannot be touched by any creditors and it would be covered by bank compensation scheme. Anyway if the person buying the business is worried just move banks
Dave
