Forum Replies Created
-
Posts
-
Re: dishwasher Thermostat/High limit thermostat location
what do you mean by high limit thermostat ?
what is the dishwasher doing wrong ?
if its not heating then yes it may well be the heater ( as Kwatt says) as it has safety stats that blow if it gets too hot to stop overheating and fires
Dave
Re: Diplomat 8322 loud electrical bang/crack
Was the Machine running at the Time ? If yes does it do it at the same time in the programme ?
Dave
Re: LG Fridge / Freezer works intermittently
To be honest any 12v relay with the same spec will work. Each manufacturer of relays has their own numbering scheme but if it’s the right coil voltage and current rating will be ok As long as it physically fits the board Dave
Re: Indesit dif04 filling with water
If water is coming into the machine when it is turned off the water valve is probably leaking in very slowly so needs changing. You have already proved that by turning off the water tap and it stopped. Dave
Re: LG Fridge / Freezer works intermittently
why cant you find the relay seems to be a popular one
http://uk.farnell.com/panasonic-electri … eated=true
all I did was to put JW1aFHN DC12V into google
DaveRe: Diplomat amp6855-1 fridge freezer
its safe but it wont work properly and the fridge may not get cold at all
Dave
Re: zcv662mno
are you sure the customer is not faulty?
can see why the top oven uses it from go but why would the bottom oven and it would not be needed till it got too hot. that’s what the stat is for
is there a fault with this or is it just the customer thinks it should be running
Dave
Re: Noisy drum on bosch classixx 1200 express
due to the design of the tub you need a bearing kit that includes a seal and screws to bolt the drum back together. to split drum you have to break the plastic clips and screw the drum back together
bosch gen kit 172686
seal kit only no bearings 265964
if you want parts breakdown go here
http://www.bosch-home.co.uk/store/spareparts/searchand put you Enr in
then go here https://shop.ukwhitegoods.co.uk/ to source spares
Dave
Re: Extractor Fan for Island Hob
have you seen this other post re island hoods
post443854.html?hilit=island extractor#p443854
Dave
Re: pulley left or right thread?
it should be a standard right hand thread. there is no reason to engineer a left hand thread here as the pulley is locked to the shaft and the nut only holds it in place
but i cant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain
Dave
Re: Whirlpool to do a recall on Hotpoint dryers
This is reminding me more and more of PPI
its never going to end !!
Dave
