Forum Replies Created
-
Posts
-
Re: Beko CDA539FB-2 air sensor location
it mentions air sensor in the text at the top of the doc and gives a part number
checked parts breakdowns and tech info but does not list air sensor. in fact part diags dont list any of the sensors
shows 2 ntc in the wiring diag
1 defrost sensor
2 evaporator sensorDave
Re: Can anyone tell me what this Samsung light means?
i would email Samsung with the same picture. i had a look but cant get any info. their manuals a a but stark of info
Dave
Re: Neff V5340X0GB/04. Drum rubbing against door seal
Part No.00473747 Description Drum cross Price £ 120.43
see website below and put your enr in
http://www.neff.co.uk/store/spare-partsyou may need other parts as well but the spider is the main problem. if you do go for it strip it before you order as you should have stopped using it before now and you dont know what you will damage stripping it
Dave
Re: White knight dryer
there are 3 stats. 2 round the heater and exhaust
long shot is wiring from heater correct there is normally a spare terminal and i have seen wires placed wrong
white night are good and have hidden resources if you know where to look. below is wiring and part manual
http://www.whiteknightrange.co.uk/service-manuals/
also did you try wet clothes as its a sensor dryer
Dave
Re: Beko c/tdryer DCU6130W
there is a second thermistor at the front that senses the heat in the filter area. if that is out of spec it will either overheat or not heat as it thinks its hot enough
after that you would need to see if the heater relays on the board are energising or not
Dave
Re: T/bendix oven thermostat
qualtex showing no stock but special order item. would have to contact them to see if it still available
Dave
Re: Neff cooker hood filter.
not needed if its vented outdoors
carbon filter is only for smells
DaveRe: Repair Tags?
mine are not as big or complex. no invoice bit etc. we have to write customers details twice but apart from that they work
we then have a big book where all the repair numbers are down the margin. gives us a quick look up for repair statusDave
Re: Repair Tags?
have mine printed
3 parts A records B customers copy C appliance tag all with same number
Dave
Re: Elica io se extractor
web lists
Dr Cooker Hoods
01252 351111as agents give them a ring they may be able to email a breakdown
Dave
Re: Qualtex Account Closure
I remember a carrier going bust a few years ago and the extra load put on the rest meant the 5pn cut off had to end
can anyone explore the possibility of asking Qualtex to add a send order to its software but delayed till 3 to allow people to add items up to the deadline without missing it. its got to be a positive selling feature
Dave
Re: Qualtex Account Closure
even if the WTA could get Qualtex to move it to 4pm it would help. 3 pm is difficult. you try to hold sending the order so as to be able to add things to it but then miss the deadline
there must be a way to change the Qualtex order system so you can select send the order but qualtex dont action it till 3pm. that way we could add things till the last minute but know the order will be sent that dayDave
Re: samsung grill element
you would have to ask to be certain but this look likely
https://shop.ukwhitegoods.co.uk/dg47000 … ll-element
you right its a bit pricey
Dave
