Forum Replies Created
-
Posts
-
Re: BOSCH WAN28280GB / or advise what machine to purchase!
think that is the new model from the polish factory to replace the WAE range, and that range is great
Dave
Re: BOSCH WAN28280GB / or advise what machine to purchase!
there are 3 of them but only checked 1 and that splits
go here
http://www.bosch-home.co.uk/store/spareparts/search
put in Enr and check ( normal Enr WAN28280gb /05 your is missing last number hence there are 3 of them)
if thing like bearing seal are available then it will split
Dave
Re: 1 oven on New world 90dfdo range not functioning
some ovens have an overheat stat. normally a 2 wire stat mounted on the oven frame somewhere. most of them are round the back but dont know with this cooker
Dave
Re: Lamona HJA 8362 – not controlling heater?
the heater is switched on by a relay on the board if that relay is short circuit it would cause a problem like this
Dave
Re: ISE W256W Thermistor tripping RCD
ah that makes more sense
check just below the pulley sounds like you bearing system is failing and the water seal is letting water through that is leaking on the thermistor
Dave
Re: Brandt cooker hood AD689XE11
most cooker hoods you have to remove the chimney to access it
i am assuming in your case they have toiled up to it after it has been installed which may cause you a few problems
Dave
Re: ISE W256W Thermistor tripping RCD
from what u say thermistor has a short to earth
needs replacing
Dave
Re: Suppressor in Zanusi Electrolux ZWF16581W
configured board part number
97391452 26 29-00 / 0 (973914522629000)
copy and paste the number without spaces and / into google
Dave
Re: Suppressor in Zanusi Electrolux ZWF16581W
because they want to, spike on the mains etc
sometimes its the board power supply that fails so the board may be repairable but a new board will be £100 or so. cant find a listing for it also there are 12 machines with the same model so I would need the pnc number (like 91452262906) to narrow it down
Dave
