electrofix

Forum Replies Created

Viewing 15 posts - 16,216 through 16,230 (of 19,550 total)
  • Author
    Posts
  • in reply to: Hoover Logic 1200 A3786 #438239
    electrofix
    Moderator

    Re: Hoover Logic 1200 A3786

    look at where the arrow is pointing and look at the brush ring photo (yours is black but its the same)

    boy have i seen this mistake hundreds of times

    Dave

    in reply to: Hoover Logic 1200 A3786 #438236
    electrofix
    Moderator

    Re: Hoover Logic 1200 A3786

    it is the same thats the field coil and the brushes do not connect there look again at the pictures

    the second picture is just the brush holders

    post a picture of the brush holders

    dave

    in reply to: Hoover Logic 1200 A3786 #438234
    electrofix
    Moderator

    Re: Hoover Logic 1200 A3786

    like here

    Dave

    in reply to: Hoover Logic 1200 A3786 #438233
    electrofix
    Moderator

    Re: Hoover Logic 1200 A3786

    no wrong teminal
    look down the side of the metal brush holder

    Dave

    in reply to: Hoover Logic 1200 A3786 #438231
    electrofix
    Moderator

    Re: Hoover Logic 1200 A3786

    the wire on the brush where have you put it ?

    a lot of people put it on the field coil by mistake and there is a terminal on the brush holder

    Dave

    in reply to: electrulux ew12550w prod 914606113 00 #438672
    electrofix
    Moderator

    Re: electrulux ew12550w prod 914606113 00

    i get part number 5028 62 81-00 / 6

    have pm,ed you the parts list

    Dave

    in reply to: Zanussi ZCV668MX #438667
    electrofix
    Moderator

    Re: Zanussi ZCV668MX

    just pm’ed you

    Dave

    in reply to: Miele KM5953 #438609
    electrofix
    Moderator

    Re: Miele KM5953

    cracking it open wont hurt. first make sure its well out of warranty. if its only just it might be worth customer contacting miele and complaining.
    if no the only poss fault you can cure is a power supply problem. i suspect the boards are similar to televisions with a small standby power supply poss fed with a switch mode chip. these can fail and its worth checking.
    if no its a new board from Miele and will be an interesting price

    Dave

    in reply to: Belling CTC60 Hob #438616
    electrofix
    Moderator

    Re: Belling CTC60 Hob

    my guess is the rings will be controlled by a relay on the pcb. the chances are this relay has failed closed. you can check this with a multi meter .. if yes they are normally easily available from places like RS

    Dave

    in reply to: Siemens dishwasher SF24T258GB/15 #438646
    electrofix
    Moderator

    Re: Siemens dishwasher SF24T258GB/15

    is it trying to drain at the time ?

    think the light is used for fill and drain

    Dave

    in reply to: Samsung 14kg washing machine #438643
    electrofix
    Moderator

    Re: Samsung 14kg washing machine

    that looks like a standard type oil seal. if you remove it it should have 3 numbers on it. internal diameter, external diameter, and thickness see connect SEL4812

    if you have these numbers a local bearing supplier may be able to match it

    as for the drum seal, with the modern plastic tubs you can get away with the old seal over 80{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time with no probs

    Dave

    in reply to: Lamona oven HJA3300 #438619
    electrofix
    Moderator

    Re: Lamona oven HJA3300

    first job take socket or spur box off the wall and check terminal to see if they are loose.
    if its plugged in try an extension lead from another socket

    Dave

    in reply to: Lamona oven HJA3300 #438617
    electrofix
    Moderator

    Re: Lamona oven HJA3300

    don’t rule out the mains connection to the oven and sheer chance it always does it when it does

    Dave

    in reply to: Beko wm5100w fault #438603
    electrofix
    Moderator

    Re: Beko wm5100w fault

    could be tacho or the board either will cause this fault

    Dave

    in reply to: MCC4060E AEG Electrolux microwave #438601
    electrofix
    Moderator

    Re: MCC4060E AEG Electrolux microwave

    still sounds like the element. prob got a problem on the neutral side of the element. when you open the door you may find the element gets fed 2 lives which stops it working but blows your trip

    megger the elements but disconnect first. if they are ok get them hot and try it then

    Dave

Viewing 15 posts - 16,216 through 16,230 (of 19,550 total)