Forum Replies Created
-
Posts
-
Re: BEKO BC73F OVER FREEZING
not a lot of tech info on this one seems to be on the change from normal to electronic stats
have sent you the sensor change info there are only 2 sensors and neither are foamed inthere are also 3 models
BEKO BC73 F 7231846319
BC73F 7244746318
BC73FC 7516520002Dave
Re: Siemens IQ300 WM14Q390GB
maybe
since the machines drum changes direction you could have a blown track for the spin direction but machine will still turn the other way
Dave
Re: Whirlpool ADG7460 851144015871
with all whirlpool dishwashers first check door wiring and then the motor
Dave
Re: Questions from a 4th year Apprentice
is a bit of a non argument. both wires carry the current that allows the load to do its work. so both wires carry load current. the only difference it you cant get a shock off a neutral as its bonded to earth
Dave
Re: Questions from a 4th year Apprentice
continuity test will tell you if a component is open circuit but will not tell you when its energised. the only way to do this is to look for voltages when the unit is powered up.
prob against all the health and safety regs these days but a darn site quickeras for the neural theory i would have to read the text to see where they are coming from
Dave
Re: Bosch WAQ283S0GB Drum bearings
a lot of Bosch machines used sealed drums check yours if it cant be split then it a complete unit
parts breakdown here
http://www.bosch-home.co.uk/store/spareparts/search
but you will need the last 2 digits of the EnrDave
Re: Bosch Exxcel 7/4
spare part diags
http://www.bosch-home.co.uk/store/spareparts/searchcheaper way may be
http://www.ebay.co.uk/itm/Bosch-WVH2836 … SwpoJXDocI
if its close to you
Dave
Re: Hoover Logic 1200 A3786
yes got a gen hoover suspension kit if you want it
part no 09049313
do a google image search you will see it
does not come with shafts so they have to be ok
Dave
Re: Bosch WAE24164GB/30 no motor.
done a couple with no probs
should be ok unless the relay contacts have welded and will normally only do that if it goes with a bangDave
Re: Bosch WAE24164GB/30 no motor.
it will go into fault mode if the motor does not move and i think it will also go if its open circuit due to blown track
there are a few resets but the one you have tried is correct one for wae seriesDave
Re: Hoover Logic 1200 A3786
its a trade only site
i will have a look in work got a sneaking feeling i may have a gen pack still if that fails ask the site shop who may be able to order for you
Dave
Re: indesit L6sgb sump hose
qualtex part number seems to be IWH24
found this
http://www.appliancespares-direct.co.uk … -1823.htmlthey say its in stock
Dave
Re: Bosch WAE24164GB/30 no motor.
have you checked board for damage ?
clear proceedure is
turn knob to 6 o clock
press and hold spin speed
turn knob to 7 o clock
now release spin button
sometimes take 2 or 3 triesworks on lots of bosch machine with spin speed button
