[electrofix]

Re: Whirlpool/Zanussi ACC/Sole Motors Hot 22mins into wash c

have you checked the tacho magnet?

Dave

[electrofix]

Re: miele G1270SCvi d/w circulatiion impellor seal

just ring miele. they are quite good will happily give you part numbers etc and email breakdowns if you ask

they will know if the unit strips down or not. also most miele parts have the part number on them

Dave

[electrofix]

Re: hygena switch

pull it up on your screen. press the print screen button.
open ms paint or a word processor. paste doc and print

have done it for u thanks to connect for info

Dave

[electrofix]

Re: Whirlpool int D/W 16 Flashes – error code

think i had one like that a few years ago ended up being broken wires in the door

Dave

[electrofix]

Re: Hotpoint Wmfl833

have you checked the board for faulty caps ?

Dave

[electrofix]

Re: Candy PVI 640 C induction hob

yes or any appliances on that circuit if it was a circuit fault

you dont live on a strange electric supply do you like way out in the countryside or you own generator or anything like that ?

Dave

[electrofix]

Re: Candy PVI 640 C induction hob

sound like a board fault. you could measure the voltage to see if its low or high but apart from that cant think of anything else. as a quick test you could disconnect it and power it up from another source such as a socket. since it does not need to be in use to fail you will know quickly.
as a long shot check its earthed ok. cant seeing it making a difference but its longshot time

Dave

[electrofix]

Re: hotpoint oven doors

the only way you can find out is to see if the part numbers match. the chances are there may be cosmetic changes (different glass, colour etc) but if the rear of the door with the hinges is the same it could well fit (but cant promise)

Dave

[electrofix]

Re: washing machine cycle test

machine may have problems but you will have to cure the supressor first to find out. it is possible the original short damaged the supressor it is also possible it failed because it wanted to

Dave

[electrofix]

Re: washing machine cycle test

it will not cause a problem to the machine

Dave

[electrofix]

Re: Candy PVI 640 C induction hob

when does the unit fail?

when you switch the unit on at the wall or

when you put a pan on and start cooking ?

Dave

[electrofix]

Re: ZanussiZWF1451W

cant find job card but i think we came to conclusion it was a board fault and scrapped it

Dave

[electrofix]

Re: Hoover Dryer Relay panel – Which capacitor?

did you fid a cap from cpc ?

dave

[electrofix]

Re: Bridge Indesit Door Lock

as with most indesit machines
if it wont go check brushes first

Dave

[electrofix]

Re: ZanussiZWF1451W

not from what i can remember

will pull the works card tomorrow see if i can see anything in case my ageing memory fails me

Dave

[Author]

Posts