Forum Replies Created
-
Posts
-
Re: Miele G1222SC heating problem
miele do not restrict parts but they are expensive so you have to be sure of the part you require
Dave
Re: Hoover OPH714DS door locking
had similar things before.
the big black block on this board is a bridge rectifier. these are easily tested with a multimeter. there will be plenty info on the net on how to test it
Dave
Re: AEG dishwasher code 30
you have to find the leak. the base has a float so if it leaks it shuts the unit down to stop flooding.
you have to take the sides off the unit and look for the leak that is filling the baseDave
Re: Whirlpool American dryer 3rleq8033sw1 heating problems
yes i had that problem with connect am waiting for rep to pick it up and credit me
also make sure outlet hose is metal type not plastic. but dont order from connect they got that wrong too. so got one from wickes
Dave
Re: Belling cooker
if this switch is in your meter cuboard with a test switch on it then you have an earth fault somewhere in the cooker
Dave
Re: rangemaster 110 professional plus
have seen one of these but the one i had melted the term block and blew a 50A breaker.
but
just the way you describe the fault makes me think there is a pcb controlling it. if it was a stat it would not start till things got hotDave
Re: Whirlpool American dryer 3rleq8033sw1 heating problems
its got 2 be one of 2 thing
1 airflow
2 the wrong stat1 this dryer is a vaccum type. ie the fan pushes the air out that lowers the pressure in the drum. the only way air can get in is over the elements. if the drum seals are faulty the air will not come in over the elements causing it to overheat
2 the wrong stats
go here
http://www.maytagpartsonline.com/
put your model in and get maytag part number. should be the same as printed on your stat
plus did you change both stats on heater ?Dave
Re: Hoover OPH714DS door locking
just had exactly the same fault
upon investigating the main prog module i found a break in the track where it had blown. its hard to see as its only a 5mm break. the cause of this was traced to a blown motor board rectifier in the white box at the bottom of the machine
Dave
Re: zan f/free ZNB404s 92503441400 fridge warm
have pm’ed you a few bits
have got another file that might help but its too big at 11meg to send by pm
if you would like to look at it send me an email address and i will see if it will send there
DaveRe: Bosch KUR1505 built-in refridgerator not cooling
thats part of the refrigeration circuit. its brazed into the tubes and removes any moisture thats left in the circuit after the gas is put in
from your point of veiw it cant be your fault and if it was you need specialist equipment to replace it
Dave
Re: Whirlpool int D/W 16 Flashes – error code
yes read that, i thought it was strange at the time. error code was beyond those listed but when i found the wire and fixed it. It cured the fault
still dont know whyDave
Re: Can you tell me what this button for?
manuals
http://www.siemens-home.co.uk/customer- … er-manuals
Dave
Re: Bosch KUR1505 built-in refridgerator not cooling
look here for a parts breakdown
http://www.bosch-home.co.uk/store/spareparts/searchDave
