[electrofix]

the replacement glass is about £80 from Bosch

you could try a high temperature silicon but its a try it and see job

Dave

[electrofix]

would not trust

uk service has different directors to Northumbria Technical Services ltd so how can one act for the other

directors of uk service are involved with 2 other similar companies both late in filing accounts. uk service is also making a loss

Dave

[electrofix]

no longer do you design to a quality its all about price

Dave

[electrofix]

neon_3SP_glow wrote:Thanks Dave, will check when I return and have help to access the machine.

But, I’ve never had a Bosch machine do this due to heater fault. Certainly not affecting a cold rinse or spin cycle.

agreed but its a quick painless test so worth trying. Does sound like a board fault but which one is another problem

is it display or inverter. your getting no motor action so it may be worth opening inverter. Have had condensation on panels at the bottom before, oh and slugs as well on a few occasions

Dave

[electrofix]

always worth disconnecting heater as a check

Dave

[electrofix]

no all models of this have the bpm motor so no cap

could be motor or board

Dave

[electrofix]

probably got no chance of getting it

if you look on connect all you see is lots of obsolete parts

diagram is not on hotpoint site which means it old in their eyes

Dave

[electrofix]

this one seems to be the same on ebay

https://www.ebay.co.uk/itm/166570070965?itmmeta=01HPJ99T923CY4ZT7CJNXSTNJ1&hash=item26c85993b5:g:0gcAAOSwO4lltPox&itmprp=enc{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}3AAQAIAAAA4ND3cwKfAWHe{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2FwZjDpYtRU{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2FjJKskjYyGHrw7xzpIpG8lwc3lqyvF4z7oFDin6gRJVHbYf9vMAITfBxxVMB5SrKTxc6vbtpMsr5OEKrpkjoIPpS8dWFFankrE4iYyVqd6786FimwMxeJClJMbCMglyyacCUHXtNfeGRcZp3l9l3AAJkw85GvE77pIb{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2FFUpbLMX{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2BtGNwzBx0if8{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2BVzFfo4R7DXiqjyNOnLFDgOjwrfxyuVGn43dRcxFfafvrCULoDHynP0mbkVu8tZ{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2BJkx3oRTyrbErgUMa{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2FMwkUmOqOo0ac2X{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}7Ctkp{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}3ABk9SR9qkp8m0Yw

its a risk but at that price might be worth a punt

Dave

[electrofix]

does sound a bit precise

my first checks would be door switch. open door and see if display flashes

poss moisure in case

Dave

[electrofix]

its not your fault

i assume a fault in the insulation allowed dmpness to form on the evaporator coils and over time its expands

Dave

[electrofix]

if you have bulging you have probably got ice inside the wall

in a word its scrap

Dave

[electrofix]

with these motors always check brushes first

Dave

[electrofix]

Kentish wrote:I’ve seen a lot more corrosion on oven cavities in the last few years. The biggest reason I feel is the growth of oven cleaning companies and the chemicals they use.
If an oven cavity is that corroded, I see no point in trying to save the oven, as rust will continue to spread.

its also down to cost cutting and using thinner steel

Dave

[electrofix]

assume its a normal cooker and not microwave

depends how big these holes are. there will be insulation above so very small holes should not be a problem

just depends what you mean by small

Dave

[electrofix]

this model does have wheels

you would have to check the wheels but if the pad is worn maybe its just that

https://www.hotpoint.co.uk/spare-parts/bom/ctd80p-95313560000

parts diagrams

Dave

[Author]

Posts