[electrofix]

Re: Whirlpool top loader no motor drive.

i did not like these machines at first got used to them now most parts are very easy to fit and maintain they look a lot harder than thet actually are

can fit this clutch in under 10 mins cant do that in most other machines

Dave

[electrofix]

Re: hotpoint ffa 70

you dont happen to have part no for the thermistors do you please

Dave

[electrofix]

Re: Bosch Dryer WTA4007GB/07

no problems m8

glad you managed it no so bad when you have done one my first one took some thought

Dave

[electrofix]

Re: Zanussi DE6855 fault

looked this up on lux disk

there are seven variations with different product codes although info may be same

do you have product code ?

Dave

[electrofix]

Re: Bosch Dryer WTA4007GB/07

this is a lot easier than it looks

remove top and back

remove covers over heater

undo drum centre bearing at rear and there is enough room to spring drum and get belt through

put bolts back in let belt flop down at back of drum and there is enough slack to push belt through back of fan chamber ease it round fan and back through the hole all that remains is to stretch belt on drum by turning drum by hand slowly

took me 10 mins the other day dont take off motor or fan

hope this helps

Dave

[electrofix]

Re: Diplomat washer/dryer..Spins on dry???????

dont know this machine but some of the older hotpoint machines used to do the same thing if the edge connectors were not making proper connection worth a try

you could have a word with emw and see if this is a fault they have heard of

Dave

[electrofix]

Re: Zan 914517353/01 ZWF1241W

nice fault have no idea but i had one this week with and e51 fault (shorted motor triac) motor measured .22 meg after drying with hair dryer got it to .75 meg and machine worked so your reading should not affect it

sounds like you need to pack a hair dryer and warm all machione electrics up and see what happens

hope you find it

Dave

[electrofix]

will check am only going on what cust says will check and report back

dave

[electrofix]

Re: indesit w103uk

many thanks will ring connect

Dave

[electrofix]

Re: Zanussi FS1255W

you need to get yourself the disk from lux only about £25 pound best money i ever spent includes all diags and service manuals for lux tricity aeg etc

let me have the product code as there are 2 listed 91479116800 and 91479110400

if you pm me your email will do my best to get you the service manuals off disk and email to you unless some other kind soul will do it first

dave

[electrofix]

Re: BOSCH H5962NOGB/01 – TRIPPING ELECTRICS

i take it that you have checked the door switches are working correctly as these are set to blow the fuse if microswitches either fail or stick

Dave

[electrofix]

Re: diplomat adp8242

thanks thought that may be way forward just needed confirmation

expensive ‘o’ ring though got a quote at over £7 each at maddox any cheaper suppliers ?

thanks

Dave

[electrofix]

Re: Wax in Bosch SGS43A42UK/01 dishwasher

we have got the maharishi centre in skelmersdale complete with yogic flyers could this be the problem lol

Dave

[electrofix]

Re: Indesit condensor t/d motor humming

agree with wilf

neutral is a permanent connection and to get reversing live is fed to one side of the cap then the other

try disconnecting the wire from timer to motor there are two of them one to each side of cap diconnect 1 turn on if no joy try the other one see if that gives you movement

hope this helps

Dave

[electrofix]

Re: Wax in Bosch SGS43A42UK/01 dishwasher

hi guys

been here as well silly woman washed candle holders took me 2 hous to strip and clear sold wax blockage stopping machine pumping out luckily after that machine was fine

Dave

[Author]

Posts