[electrofix]

have you had a close look at the harness

Dave

[electrofix]

have you tried a different socket

sparking in the socket can cause tripping

Dave

[electrofix]

check the tube from the pump to the draw

look at the pump impellor. make sure its clear and the rubber bar is intact (impellor)

if all ok it can only be pump or control board

Dave

[electrofix]

you opened the pump chamber at the rear so was it full or empty of water ?

Dave

[electrofix]

Not seen it myself. Can probably look it up but away till Monday.
if you get no reply’s add a reminder Monday so when I log in from home I can see if I have any info

Dave

[electrofix]

slyp98 wrote:Oh another thing I heard was a relay clicking away every 10 seconds or so on the main board

thats interesting

that sounds like a power supply is coming on then cutting out

I would try to disconnect all i could but leave the power to the board. then power up and see if it still clicks

does sound like a board problem

also looks like an integrated unit so if under 2 years its probably under guarentee

Dave

[electrofix]

ok lets tell you how i did it

goto

https://parts.indesit.co.uk/

put in your ind code 769991025023

that will bring up part diagrams

click on pic of the door and you will see dispenser is part of door inner

select part and click through gives you part no C00386638

indesit’s price £117

Dave [h=2][/h]

[electrofix]

getting F13 is easy. why the dryer runs i dont know

Dave

[electrofix]

checked tech but no wiring or circuit info for this one

Dave

[electrofix]

[USER=”125″]don[/USER]

you got any knowledge of this ?

Dave

[electrofix]

virtual sensor fault

by fluke have the manual for this one

check email

Dave

[electrofix]

well they list it as a gen part so should be fine

should come in a bag with gen part no on and the correct logo

Dave

[electrofix]

is it a genuine adaptor ?

some of the copy parts dont perform as well

Dave

https://shop.ukwhitegoods.co.uk/c00206593-tumble-dryer-vent-adaptor

[electrofix]

sorted

Dave

[electrofix]

well its all in HEX

so 11 is B in Hex and 14 is E
that makes it EBE

seem to remeber the fix for this was reflowing solder joints on some of the power relay. poss hairline cracks on board by the relays

will email complete file

Dave

[Author]

Posts